Western Digital Caviar 80 GB, WD800BB (00CAA1)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
'WD Caviar' Enhanced IDE Hard Drive
WD800BB-00CAA1
Brand • Model • Rev
Western Digital WD800 BB 00CAA1
Board ID
2060-001092-007 REV A
Interface
IDE (Ultra ATA/100)
Form factor
3.5"
Controler
Western Digital WD80C24
Flash1 Chip
STMicro M29F102BB
Flash1 Size
128 KiB 0.125 MiB <br />131,072 B <br />1,024 Kib <br />1 Mib <br />1.220703e-4 GiB <br />
RAM1 Size
? MiB
RAM1 Chip
Samsung K4S161622D-TC70
Vendor stated capacity: 80 GB74.476 GiB <br />0.0727 TiB <br />76,263.108 MiB <br />80,000 MB <br />79,967,664,442.326 B <br />
Usable capacity: ? GiB

Additional chips
Spindle Motor & VCM Controller;STMicro; L6278;L6278 1.2, MALAYSIA, ST;1;
Read/Write Channel IC;Western Digital;50G6474IBM141;TALON, 50G6474IBM141.1;1;
Voltage Regulator;International Rectifier;IRU1239SC;;1;

Retail
(Est.) release date 2002
ASIN B003FDEJBA Flag of the United States.svg
Country of manuf Malaysia
 Storage capacity (vendor stated)HDD rotation speedInterface
Western Digital Caviar 80 GB, WD800AAJS (00B4A0)74.476 GiB0.0727 TiB <br />76,263.108 MiB <br />80 GB <br />80,000 MB <br />79,967,664,442.326 B <br />SATA II
Western Digital Caviar 80 GB, WD800BB (00CAA1)74.476 GiB0.0727 TiB <br />76,263.108 MiB <br />80 GB <br />80,000 MB <br />79,967,664,442.326 B <br />IDE (Ultra ATA/100)
Western Digital WD800BEVS-08RS74.476 GiB0.0727 TiB <br />76,263.108 MiB <br />80 GB <br />80,000 MB <br />79,967,664,442.326 B <br />5,400 RPMSATA II

Western Digital not currently documented.

Overview

From a unit w/ a S/N of WMA8C1541008, manuf. date of 26 MAR 2002, and DCM of HSEHNQ2AH...

  • "2060-001092-007" and "REV A" is etched onto the board.

From online marketplace listings of this board, it seems to be using..

  • 50G6474IBM141.1 <??>, Read/Write channel IC @ U7
  • STMicro L6278 - Spindle motor + VCM controller @ U1
Utility output • >>
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar family
Device Model:     WDC WD800BB-00CAA1
Serial Number:    WD-WCA8E5603170
Firmware Version: 17.07W17
User Capacity:    80 026 361 856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Sep  7 20:06:59 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (3120) seconds.
Offline data collection
capabilities: 			 (0x3b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  58) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   198   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   118   096   021    Pre-fail  Always       -       3166
  4 Start_Stop_Count        0x0032   100   100   040    Old_age   Always       -       895
  5 Reallocated_Sector_Ct   0x0033   199   199   140    Pre-fail  Always       -       10
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   039   039   000    Old_age   Always       -       44796
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       799
196 Reallocated_Event_Count 0x0032   190   190   000    Old_age   Always       -       10
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       9
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed without error       00%       958         -
# 2  Conveyance offline  Completed without error       00%       957         -
# 3  Extended offline    Completed without error       00%       935         -
# 4  Extended offline    Completed without error       00%       921         -
# 5  Extended offline    Aborted by host               80%       919         -
# 6  Short captive       Completed without error       00%       573         -
# 7  Short offline       Completed without error       00%       976         -

Device does not support Selective Self Tests/Logging
  • hdparm -i /dev/hda:
Model=WDC WD800BB-00CAA1, FwRev=17.07W17, SerialNo=WD-WCA8E4158633
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4 
DMA modes: mdma0 mdma1 mdma2 
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 

* signifies the current active mode