Wistron NeWeb RDAA-81
From TechInfoDepot
Jump to navigationJump to search
| abg (AG108) | |
|---|---|
| access point | |
| InfoDepot Wiki | Wistron RDAA-81 |
| 3rd Party Firmware | |
| dd-wrt | Activation Required |
| OpenWrt | Supported (Unofficially) |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Wistron NeWeb RDAA-81 |
| FCC ID | none specified |
| Type | access point |
| CPU1 | Atheros AR2313A |
| CPU1 Type | MIPS 4Kc |
| CPU1 Speed | 180 MHz |
| Flash1 Chip | Spansion S29AL032D |
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Atheros AR2313A |
| Switch | Marvell 88E6060 |
| Ethernet Port Count | 3-100MbE-LAN |
| Wired Standard | IEEE 802.3/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | zImage loader (LZMA) |
| Stock FW OS | Linux |
| Expansion IF types | none specified |
| Power | 5 VDC, 2 A |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
DD-WRT • (List) , OpenWrt • (List | Dev | DLs) |
| Physical | |
| Dimensions | 140.55 X 141.0 X 26.0 (mm) |
| Radio 1 | |
| Chip1 | Atheros AR5112A |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| Wireless Standard | IEEE 802.11a/b/g |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 2400 -2497 or 4900 – 5825 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Wistron NeWeb devices with specifications, see Wistron NeWeb.
Overview
same hw as CA8-4 Pro
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
| DD-WRT Activation Required. |
Supported by dd-wrt as of = v.24 rc7 - build 9360
Please insert instructions here
Flashing OpenWrt
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
Support started version: Unofficially
Current supported version: Unofficially
Current supported version: Unofficially
Please insert instructions here
Categories:
- Wistron NeWeb
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR2313A
- Atheros
- Embedded System MIPS 4Kc
- Embedded System
- Embedded System Marvell
- Embedded System 88E6060
- Marvell
- DD-WRT Supported
- OpenWrt Supported
- Embedded System AR5112A
- Embedded System IEEE 802.11a/b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- DD-WRT Activation Required
- English Documentation