Xiaomi Mi AX3600
| abgn+ac+ax (AX3000) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Xiaomi Mi Router AX3600 | |||||||||||||||||
|
| |||||||||||||||||
| Homepage | Product page | ||||||||||||||||
| WikiDevi.wi-cat.ru | Xiaomi Mi AX3600 | ||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Partial Support | ||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | Xiaomi Mi AX3600 (M60) | ||||||||||||||||
| FCC ID | 2AIMR | ||||||||||||||||
| Board ID | H92504PN062A1 | ||||||||||||||||
| Type | wireless router | ||||||||||||||||
| CPU1 | Qualcomm IPQ8071A | ||||||||||||||||
| CPU1 Type | ARM Cortex-A53 | ||||||||||||||||
| CPU1 Speed | 1.0 GHz ( 4 cores ) | ||||||||||||||||
| Flash1 Chip | Winbond W29N02GZSIBA | ||||||||||||||||
| Flash1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Parallel NAND) | ||||||||||||||||
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) | ||||||||||||||||
| RAM1 Chip | EtronTech EM6HE16EWAKG-10H | ||||||||||||||||
| ETH chip1 | Qualcomm IPQ8071A | ||||||||||||||||
| Switch | Qualcomm Atheros QCA8075 | ||||||||||||||||
| Ethernet Port Count |
1-1GbE-WAN 3-1GbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||||||
| Stock bootloader | U-Boot | ||||||||||||||||
| Stock FW OS | Linux 4.4.60 | ||||||||||||||||
| Expansion IF types | none specified | ||||||||||||||||
| Power | 12 VDC, 2 A | ||||||||||||||||
| Connector type | barrel | ||||||||||||||||
| Serial Port (UART) | yes, 4-pin header | ||||||||||||||||
|
Flags: | |||||||||||||||||
|
Additional chips | |||||||||||||||||
| Other | |||||||||||||||||
|
Default SSID: Xiaomi_XXXX (19 addl. devices) | |||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||
| Retail | |||||||||||||||||
| (Est.) release date | March 2020 | ||||||||||||||||
| Country of manuf | China | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Chip1 | Qualcomm QCN5024 | ||||||||||||||||
| Wireless interface OUI | 5C:53:C3 | ||||||||||||||||
| Antenna Connector Type | MHF4 | ||||||||||||||||
| MIMO status | 2x2:2 | ||||||||||||||||
| Wireless Standard | IEEE 802.11b/g/n/ax | ||||||||||||||||
| 802.11ax | up to 574 Mbps | ||||||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||
| Radio 2 | |||||||||||||||||
| Chip1 | Qualcomm QCN5054 | ||||||||||||||||
| Wireless interface OUI | 5C:53:C3 | ||||||||||||||||
| Antenna Connector Type | MHF4 | ||||||||||||||||
| MIMO status | 4x4:4 | ||||||||||||||||
| Wireless Standard | IEEE 802.11a/n/ac/ax | ||||||||||||||||
| 802.11ax | up to 2402 Mbps | ||||||||||||||||
| 802.11ac | up to 1733 Mbps | ||||||||||||||||
| 802.11n | up to 600 Mbps | ||||||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||||||
| WiFi Operating Frequency | 5 GHz | ||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Xiaomi devices with specifications, see Xiaomi.
Overview
Links of Interest
Reviews
- Xiaomi Mi Router AX3600 on CNX|Software
- Xiaomi Mi Router AX3600 on AC|WiFi (CN)
- Xiaomi Mi Router AX1800 on Smzdm
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Subtarget: ipq807x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.5
NSS acceleration
LAN Hardware: Qualcomm Atheros QCA8075
LAN Comment: 1 WAN port, 3 LAN ports
WLAN Hardware: Qualcomm QCN5024, Qualcomm QCN5054, Qualcomm Atheros QCA9889
WLAN Comment: OFDMA + MU-MIMO: 2.4GHz 2×2/40MHz ax, 5GHz 4×4/80 or 2×2/160MHz ax, one IoT 1×1 ac/n
Installation method(s):
see devicepage
Recovery method(s):
see devicepage
| git • >> |
|---|
ipq807x: add Xiaomi AX3600 Xiaomi AX3600 is a budget 802.11ax dual-band router/AP. Specifications: * CPU: Qualcomm IPQ8071A Quad core Cortex-A53 1.4GHz * RAM: 512MB of DDR3 * Storage: 256MB of parallel NAND * Ethernet: 4x1G RJ45 ports (QCA8075) with 1x status LED per port * WLAN: * PCI based Qualcomm QCA9889 1x1 802.11ac Wawe 2 for IoT * 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate * 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * LED-s: * System (Blue and Yellow) * IoT (Blue) * Network (Blue and Yellow) * Buttons: 1x Soft reset * Power: 12V DC Jack Installation instructions: Obtaining SSH access is mandatory https://openwrt.org/inbox/toh/xiaomi/xiaomi_ax3600#obtain_ssh_access Installation is done by the ubiformat method, through SSH: 1. Open an SSH shell to the router 2. Copy the file openwrt-ipq807x-generic-xiaomi_ax3600-initramfs-factory.ubi to the /tmp directory 3. Check which rootfs partition is your router booted in (0 = rootfs | 1 = rootfs_1): nvram get flag_boot_rootfs 4. Find the rootfs and rootfs_1 mtd indexes respectively: cat /proc/mtd Please confirm if mtd12 and mtd13 are the correct indexes from above! 5. Use the command ubiformat to flash the opposite mtd with UBI image: If nvram get flag_boot_rootfs returned 0: ubiformat /dev/mtd13 -y -f /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-initramfs-factory.ubi -s 2048 -O 2048 && nvram set flag_boot_rootfs=1 && nvram set flag_last_success=1 && nvram commit otherwise: ubiformat /dev/mtd12 -y -f /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-initramfs-factory.ubi -s 2048 -O 2048 && nvram set flag_boot_rootfs=0 && nvram set flag_last_success=0 && nvram commit 6. Reboot the device by: reboot Previous commands flashed an ubinized OpenWrt initramfs that will serve as the intermediate step since OpenWrt uses unified rootfs in order to fully utilize NAND and provide enough space for packages. Continue in order to pernamently flash OpenWrt: 7. SSH into OpenWrt from one of the LAN ports 8. Copy the file openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-sysupgrade.bin to the /tmp directory 9. Sysupgrade the device: sysupgrade -n /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-sysupgrade.bin Device will reboot with OpenWrt, and then sysupgrade can be used to upgrade the device when desired. |
See also
- Xiaomi Mi AX1800 (MiWiFi M59) • Review
- Xiaomi Mi AX3600 (AIoT M60) • Review • AC|WiFi (CN)
- Xiaomi Mi AX6000 (AIoT M72) • Review • AC|WiFi (CN)
- Xiaomi Mi AX9000 (AIoT M70) • AC|WiFi (CN)
- Xiaomi
- Embedded system/wireless router
- Embedded System Qualcomm
- Embedded System IPQ8071A
- Qualcomm
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System Qualcomm Atheros
- Embedded System QCA8075
- Qualcomm Atheros
- OpenWrt Supported
- Embedded System QCN5024
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System QCN5054
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation