Xiaomi Mi Router Redmi AX6E (AX6000)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac+ax (AX6000)
Xiaomi Mi Router Redmi AX6E (AX6000)
Xiaomi Mi Router Redmi AX6000 (RB06)
WikiDevi.wi-cat.ru Xiaomi Mi Router Redmi AX6E (AX6000)
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Xiaomi Mi Router Redmi AX6E
Serial number prefix RB06-MB06-VER:0103
FCC ID none specified
Board ID H92504PN219C1
Type wireless router
CPU1 checkY MediaTek MT7986AV
CPU1 Type ARM Cortex-A53
CPU1 Speed 2.0 GHz ( 4 cores ) 64-bit
Flash1 Chip ESMT F50L1G41LB-104I
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip Samsung K4A4G165WF-BCWE
ETH chip1 MediaTek MT7986AV
Switch MediaTek MT7531AE
Ethernet Port Count 1-1GbE-WAN
3-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: 5C:53:C3 (5 E, 5 W)
Ethernet OUI: 5C:53:C3 (5 E, 5 W)

Stock bootloader U-Boot
Expansion IF types none specified
Power 12 VDC, 2 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, 3.3V TTL, (115200 8N1)

Flags:
Wi-Fi 6, MU-MIMO, HE160, 1024-QAM

Other

Default SSID: Xiaomi_XXXX (19 addl. devices)
, Xiaomi_XXXX_5G (16 addl. devices)
Default IP address: 192.168.31.1
the IP 192.168.31.1 is used by 20 additional devices
of which 19 are Xiaomi devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 08 February 2022
Country of manuf China
Radio 1
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976GN
Wireless interface OUI 5C:53:C3
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 1148 Mbps
802.11n up to 600 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976AN
Wireless interface OUI 5C:53:C3
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 4804 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Xiaomi Mi Router Redmi AC2100 (RM2100)MediaTekMediaTekMediaTek
Xiaomi Mi Router Redmi AX5 (AX1800)QualcommQualcommQualcomm
Xiaomi Mi Router Redmi AX6 (AX3000)QualcommQualcommQualcomm
Xiaomi Mi Router Redmi AX6E (AX6000)MediaTekMediaTekMediaTek
Xiaomi Mi Router Redmi AX6S (AX3200)MediaTekMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Xiaomi devices with specifications, see Xiaomi.

• 4804 Mbps - 4SS 5GHz 802.11ax (160MHz chan., 1024-QAM),
• 1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan., 1024-QAM) = AX6000 class

Overview

Mi Router Redmi

See also: List of Xiaomi Wireless Devices

Specifications

CPU: MediaTek MT7986A @2.0GHz (Filogic 830) • AC|WiFi (CN)
MT7986AV @2.0GHz (DDR3/DDR4), MT7986BV @1.6GHz (DDR3)
Flash: ESMT F50L1G41LB-104I - 128MB (SPI NAND)
RAM: Samsung K4A4G165WF-BCWE - 512MB (DDR4 3200MHz)
WiFi: MediaTek MT7976AN/MT7986A - 5GHz RF ”IQ“, FEM 4xRTC66568
(Wi-Fi 6, 4x4 MIMO, BW 160MHz, 1024-QAM, 4804Mbps)
MediaTek MT7976GN/MT7986A - 2.4GHz RF ”IQ“, FEM 4x RTC66266
(Wi-Fi 6, 4x4 MIMO, BW 40MHz, 1024-QAM, 1147Mbps)
Switch: MediaTek MT7531AE (MT7531B HSGMII 2.5G PHY)
PCB: Mi MB06 - RB06-MB06-VER:0103 (PCB)

Links of Interest

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7531AE
WLAN Hardware: MediaTek MT7986AV, MediaTek MT7976GN, MediaTek MT7976AN
WLAN Comment: supports OFDMA+MU-MIMO, 4x4:4 on both bands
Installation method(s):
see devicepage, see git-commit
Recovery method(s):
see devicepage, see git-commit
git • >> 
mediatek: add Xiaomi Redmi Router AX6000 support
Hardware specification:
  SoC: MediaTek MT7986A 4x A53
  Flash: ESMT F50L1G41LB 128 MB
  RAM: K4A4G165WF-BCWE 512 MB
  Ethernet: 4x 10/100/1000 Mbps
  WiFi1: MT7976GN 2.4GHz ax 4x4
  WiFi2: MT7976AN 5GHz ax 4x4
  Button: Mesh, Reset

Flash instructions:
  1. Gain ssh and serial port access, see the link below:
     https://openwrt.org/toh/xiaomi/redmi_ax6000#installation
  2. Use ssh or serial port to log in to the router, and
     execute the following command:
     nvram set boot_wait=on
     nvram set flag_boot_rootfs=0
     nvram set flag_boot_success=1
     nvram set flag_last_success=1
     nvram set flag_try_sys1_failed=8
     nvram set flag_try_sys2_failed=8
     nvram commit
  3. Set a static ip on the ethernet interface of your computer
     (e.g. default: ip 192.168.31.100, gateway 192.168.31.1)
  4. Download the initramfs image, rename it to initramfs.bin,
     and host it with the tftp server.
  5. Interrupt U-Boot and run these commands:
     setenv mtdparts nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),112640k(ubi)
     saveenv
     tftpboot initramfs.bin
     bootm
  6. After openwrt boots up, use scp or luci web
     to upload sysupgrade.bin to upgrade.

Revert to stock firmware:
  Restore mtdparts back to default, then use the
  vendor's recovery tool (Windows only).

See also

List of Xiaomi Wireless Devices
CPU: MediaTek MT7986A @2.0GHz (Filogic 830) • AC|WiFi (CN)
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Xiaomi_Mi_Router_Redmi_AX6E_(AX6000)&oldid=518854"