Xiaomi Mi WiFi Range Extender AC1200 (RA75)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
WiFi Range Extender AC1200
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Xiaomi Mi WiFi Range Extender AC1200 (RA75)
FCC ID 2AFZZRA75
Type range extender, repeater
CPU1 checkY MediaTek MT7628DAN
CPU1 Type MIPS 24KEc
CPU1 Speed 575 MHz
Flash1 Chip Winbond W25Q128BV
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip MediaTek MT7628DAN
ETH chip1 MediaTek MT7628DAN
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader U-Boot 1.1.3 Ralink U-Boot v4.3.0.0
Stock FW OS Linux 3.10.14
Expansion IF types none specified
Power 100-240 VAC ~ 50/60 Hz, 0.3 A
Connector type AC (direct)
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 02 August 2021
Country of manuf China
Radio 1
Chip1 MediaTek MT7628DAN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7612EN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Xiaomi Mi WiFi Range Extender AC1200 (RA75)MediaTekMediaTekMediaTek
Xiaomi Mi WiFi Range Extender ProMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Xiaomi devices with specifications, see Xiaomi.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Links of Interest

M75 R0103 V1.1

Flashing

Flashing OpenWrt

Target: ramips
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7628DAN
WLAN Hardware: MediaTek MT7628DAN, MediaTek MT7612EN
WLAN Comment: MIMO 2x2:2 for each band
Installation method(s):
U-Boot TFTP recovery
Install Comment:
No HTML UI, so OpenWrtInvasion does not work
Recovery method(s):
U-Boot TFTP recovery
Comment:
Works with Firmware for mi_router_4a_mir4a_100m, but ethernet will be WAN port and inaccessible
git • >>
ramips: add support for xiaomi RA75 Range Extender
This device is a 'Range extender' variant of the Xiaomi 4A router.
Its identical to the 100m non-intl/chinese version as much as it can run
the same firmware, differences being form factor, LEDs, WPS button
and one 100M port only.
The stock firmware differs significantly, being 'app managed only'.

Device specification
--------------------
SoC:      MT7628DAN MIPS_24KEc@580MHz 2.4G-n 2x2
WiFi:     MT7612EN 5G-ac 80MHz 2T2R
Flash:    16MB W25Q128BV
DRAM:     64MB built-in SoC
Switch:   built-in SoC
Ethernet: 1x10/100 Mbps
USB:      None
Antennas: 2 x external, non-detachable
LEDs:     2 programmable blue/amber
Buttons:  WPS and reset (hidden)
Housing:  Range Extender / Wall wart
Serial:   115200,8n1

MAC Addresses
-------------
All 3 MACs are read from flash and identical to stock.
Label MAC is WIFI 2G

Installation
------------
No HTML UI on this device, serial console only. The serial connector
is unpopulated but standard size and clearly marked. Flash from the
U-Boot shell at boot by choosing (2) and flashing the sysupgrade file
via tftp.

Recovery/Debricking procedures of the xiaomi 4A and variants should
work, but there currently is no official source for the stock firmware.