Xircom APWE1120

b (B11)
access point
Downloads	Download page
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Xircom APWE1120
FCC ID	MXF-WX1560
Type	access point
CPU1	No Wires Needed Poldhu
CPU1 Type	ARM940
Flash1 Chip	Atmel AT49BV1614T
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Chip	EliteMT M12L16161A x 2
ETH chip1	No Wires Needed Poldhu
ETH chip2	Lucent Model?
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:90:4B (11 E, 37 W) Ethernet OUI: 00:90:4B (11 E, 37 W)
Expansion IF types	none specified
Power	5 VDC, 1 A
Connector type	barrel 2 mm (OD) 5 mm (ID) 10 mm (LEN)
Other
Default IP address: 169.254.107.28 Default login user: default Default login password: ^default$
Manuf/OEM/ODM	Gemtek WX-1560
Retail
FCC approval date	27 March 2001
Country of manuf	Taiwan
Radio 1
Chip1	No Wires Needed Poldhu
Chip2	Intersil HFA3861
Chip3	Intersil HFA3683
Wireless interface OUI	00:90:4B
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID Gemtek WX-1560 MXF-WX1560

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Lucent (Agere) chipsets with specifications, see Lucent.
For a list of all currently documented No Wires Needed (NWN) chipsets with specifications, see No Wires Needed.

For a list of all currently documented Xircom device with specifications, see Xircom.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

By default, the access point will attempt to use DHCP to obtain an IP address. If it fails it will assume the IP of 169.254.107.28. The AP does have a web configuration interface.

The power adapter included with the device is a Delta ADP-10SB REV: H (5V, 2A). ID/OD/Len measurements are approximate.