ZIO V11

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
WirelessBuilder Wireless Broadband Router
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
ZIO V11
FCC ID
Type
wireless router
CPU1
Marvell 88W8510
CPU1 Type
ARMv9
CPU1 Speed
160 MHz
Flash1 Chip
KH KH29LV400CBTC-70G
Flash1 Size
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Chip
ISSI IS42S16100C1-6TL x 2
ETH chip1
Marvell 88W8510
Switch
Marvell 88E6060
Ethernet Port Count
1-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
9 VDC, 0.7 A
Connector type
barrel
Other

Default SSID: default (101 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 125 additional devices
of which 2 are ZIO devices

Manuf/OEM/ODM
Retail
FCC approval date 02 October 2007
Country of manuf China
Radio 1
Chip1
Marvell 88W8510
Chip2
Marvell 88W8010
Wireless interface OUI
none specified
Antenna Connector Type
RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"PB-724-M04G-00" and "DEC 05 2006" is silkscreened on the board in the FCC photos.

The same text was found on the Zonet ZSR1134WE's board.

Like other older MRVL gear, it's probably using eCos..

Default settings are per the FCC manual.

Probable used PSU(s)

The power supply shown in the FCC photos is an unbranded TP0900700A.

Brand? TP090700A (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.2 A
 Input connector: unknown
Style: medium, horiz.
Output: 9 VDC, 0.7 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??