ZTE MF18A
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1750) | |
---|---|
Mesh Router MF18A | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
ZTE MF18A |
FCC ID |
none specified |
Type |
wireless router |
CPU1 |
Qualcomm IPQ4019 |
CPU1 Type |
ARMv7 Cortex-A7 |
CPU1 Speed |
717 MHz ( 4 cores ) |
Flash1 Chip |
Winbond W25N01GV |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND) |
Flash2 Chip |
GigaDevice GD25Q16 |
Flash2 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (SPI NOR) |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Qualcomm IPQ4019 |
ETH chip2 |
Qualcomm Atheros QCA8072 |
Ethernet Port Count |
1-1GbE-WAN 1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
5 VDC, 2.1 A |
Connector type |
USB Type C |
Serial Port (UART) |
yes, 3.3, (115200 8N1) |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Qualcomm IPQ4019 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm Atheros QCA9982 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 1300 Mbps |
802.11n |
up to 450 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented ZTE device with specifications, see ZTE.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 23.05.0
Current supported version: 23.05.5
Comment:
On board ZWave and Zigbee (EFR32 MG1P232GG)
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 23.05.0
Current supported version: 23.05.5
Comment:
On board ZWave and Zigbee (EFR32 MG1P232GG)
Please insert instructions here
Categories:
- ZTE
- Embedded system/wireless router
- Embedded System Qualcomm
- Embedded System IPQ4019
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- Embedded System QCA8072
- Embedded System Qualcomm Atheros
- Qualcomm Atheros
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9982
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation