ZTE MF269

abgn+ac+ax (AX36002R)
WiFi AP
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	ZTE MF269
FCC ID	none specified
Type	access point
CPU1 Y	Qualcomm IPQ8071A
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.0 GHz ( 4 cores )
Flash1 Chip	Macronix MX30UF2G18AC
Flash1 Size	256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND)
Flash2 Chip	Eon EN25S64
Flash2 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3)
RAM1 Chip	Brand? Model?
ETH chip1	Qualcomm IPQ8071A
ETH chip2	Qualcomm QCA8081
ETH chip3	Qualcomm QCA8081
Ethernet Port Count	2-2.5GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab/3bz
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Serial Port (UART)	yes, 1.8V TTL, 3.3V TTL, (115200 8N1)
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	Qualcomm QCN5024
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	4x4:4
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 1148 Mbps
802.11n	up to 600 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Qualcomm QCN5054
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	4x4:4
Wireless Standard	IEEE 802.11a/n/ac/ax
802.11ax	up to 2402 Mbps
802.11ac	up to 1733 Mbps
802.11n	up to 600 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.

For a list of all currently documented ZTE devices with specifications, see ZTE.

• 1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan.),

• 2402 Mbps - 4SS 5GHz 802.11ax (80MHz chan.) = AX3600 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: qualcommax
Subtarget: ipq807x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 24.10.0
Current supported version: 24.10.5

Unsupported Functions:
Phone port
LAN Hardware: Qualcomm IPQ8071A
LAN Comment: 2x Qualcomm Atheros QCA8081 2.5Gbe Phy
WLAN Hardware: Qualcomm QCN5024, Qualcomm QCN5054
WLAN Comment: 4x4:4 MU-MIMO on both bands
Installation method(s):
see git-commit
Recovery method(s):
see git-commit

git • >>

ipq807x: add support for ZTE MF269 Hardware specifications: SoC: Qualcomm IPQ8071A RAM: 512MB of DDR3 Flash1: Eon EN25S64 8MB Flash2: MX30UF2G18AC 256MB Ethernet: 2x 2.5G RJ45 port Phone: 1x RJ11 port (SPI) USB: 1x Type-C 2.0 port WiFi1: QCN5024 2.4GHz WiFi2: QCN5054 5GHz Button: Reset, WPS Flash instructions: 1. Connect the router via serial port (115200 8N1 1.8V) 2. Download the initramfs image, rename it to initramfs.bin, and host it with the tftp server. 3. Interrupt U-Boot and run these commands: tftpboot initramfs.bin bootm 4. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade.