ZBT Z800AX
From TechInfoDepot
(Redirected from Zbtlink ZBT-Z800AX)
Jump to navigationJump to searchabgn+ac+ax (AX36002R) | |
---|---|
3600Mbps WiFi6 Wireless Router | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
ZBT Z800AX |
FCC ID |
none specified |
Type |
wireless router |
CPU1 |
Qualcomm IPQ8072A |
CPU1 Speed |
2.2 GHz ( 4 cores ) |
Flash1 Chip |
Macronix MX30UF2G28AD |
Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) |
Flash2 Chip |
Winbond W25Q64DW |
Flash2 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR4 600MHz) |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Qualcomm IPQ8072A |
Switch |
Qualcomm IPQ8072A |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
SIM, M.2, USB 3.0 |
SIM Card slot |
1 |
USB ports |
1 |
M.2 Slots |
1 |
USB Hub Compatible |
Untested |
Flags: LTE | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Qualcomm QCN5024 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
4x4:4 |
Wireless Standard |
IEEE 802.11b/g/n/ax |
802.11ax |
up to 1148 Mbps |
802.11n |
up to 600 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Qualcomm QCN5054 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
4x4:4 |
Wireless Standard |
IEEE 802.11a/n/ac/ax |
802.11ax |
up to 2402 Mbps |
802.11ac |
up to 1733 Mbps |
802.11n |
up to 600 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented ZBT device with specifications, see ZBT.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
On the OpenWrt Forum
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- ZBT
- Embedded system/wireless router
- Embedded System Qualcomm
- Embedded System IPQ8072A
- Qualcomm
- OpenWrt Supported
- Embedded System QCN5024
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System QCN5054
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation