Zowee WL-370G-C

bgn (N150)
802.11n USB Dongle
Homepage	Product page
Platform
Brand • Model • Rev	Zowee WL-370G-C
Interface	USB 2.0
Connector	Male A
Form factor	corded dongle
ID:148f:2770 (6 addl. devices) Windows: USB\VID_148F&PID_2770
FCCID	none specified
Chip1	Ralink RT2770
Chip2	Ralink RT2720
OUI: 00:FD:07 (1 E, 4 W)
MIMO status	1x2:2
Wireless Standards	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
Operating Frequency	2.4 GHz
Probable Linux driver rt2800usb (in backports) or rt2870sta USB ID first seen in kernel v2.6.31 (2009-09-09) (see also passys)
Windows driver see MediaTek's website older Ralink drivers have been removed. see the Wayback Machine for some older driver sets (filter by EXE/ZIP)
Retail
Country of manuf	China

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Zowee device with specifications, see Zowee.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

The particular device populating this entry has no label or model indicator.. but it looks exactly like the Zowee WL-370G-C pictured in the above product page. Additionally, the 00:FD:07 seems to be used by some other Zowee manufactured devices.

A Wi-Fi b/g/n logo and "USB 2.0 802.11n" is printed on the top of the device's shell.

Notes

dmesg dump

[91494.755688] usb 1-3: new high-speed USB device number 6 using ehci-pci
[91494.907437] usb 1-3: New USB device found, idVendor=148f, idProduct=2770
[91494.907454] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[91494.907464] usb 1-3: Product: 802.11 n WLAN
[91494.907472] usb 1-3: Manufacturer: Ralink
[91494.907480] usb 1-3: SerialNumber: 1.0
[91495.023369] usb 1-3: reset high-speed USB device number 6 using ehci-pci
[91495.194397] phy3 -> rt2x00_set_chip: Info - Chipset detected - rt: 2860, rf: 0003, rev: 0102.
[91495.195232] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[91496.263968] phy3 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'.
[91496.264063] phy3 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29.
[91496.499390] IPv6: ADDRCONF(NETDEV_UP): wlan85: link is not ready