Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.

ZyXEL Keenetic 4G III rev B

From TechInfoDepot
(Redirected from ZyXEL Keenetic 4G III)
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
N300 Wireless 3G/4G Router
ZyXEL-Keenetic4GIII-2.jpg
Homepage Product page
Wikipedia ZyXEL
WikiDevi.wi-cat.ru ZyXEL Keenetic 4G III rev B
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Was Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev ZyXEL Keenetic 4G III rev B
Serial number prefix EMG1301-T10A
FCC ID none specified
Board ID 2050500710
Type wireless router
CPU1 checkY MediaTek MT7628NN
CPU1 Type MIPS 24KEc
CPU1 Speed 575 MHz
Flash1 Chip Winbond W25Q128BV
Flash1 Size 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Winbond W9751G6KB-25
ETH chip1 MediaTek MT7628NN
Switch MediaTek MT7628NN
Ethernet Port Count 1-100MbE-WAN1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 1C:74:0D (4 E, 4 W)
Ethernet OUI: 1C:74:0D (4 E, 4 W)

Stock bootloader U-Boot 1.1.3 Ralink v4.0.0.3 NDMS
Stock FW OS Linux NDMS 2.16
Expansion IF types USB 2.0
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, J13
Other

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1335 additional devices
of which 99 are ZyXEL devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 188 additional devices
of which 67 are ZyXEL devices

Manuf/OEM/ODM TP-LINK
3rd Party Firmware Support OpenWrt (Was)
Retail
Availability End of Life
(Est.) release date March 2016
Country of manuf China
Radio 1
Chip1 MediaTek MT7628NN
Wireless interface OUI 1C:74:0D
Antenna Connector Type soldered
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Keenetic 4G (KN-1210)MediaTekMediaTek
Keenetic 4G (KN-1211)MediaTekMediaTek
ZyXEL Keenetic 4G IIRalinkRalink
ZyXEL Keenetic 4G III rev BMediaTekMediaTek
ZyXEL Keenetic 4G rev BRalinkRalink

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented ZyXEL devices with specifications, see ZyXEL.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Links of Interest

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mipsel_24kc
Support started version: external image
Current supported version: EOL
Last Supported Version: external image

Please insert instructions here

JTAG-Serial Info

Serial

Start U-Boot with OpenWrt 19.07.1 • >>
U-Boot 1.1.3 [4.0.0.3-30] (May 31 2017 - 15:07:28)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fb0000
MediaTek SPI BBU flash driver, SPI clock: 31MHz
flash manufacture id: ef, device id 40 18
find flash: W25Q128BV
============================================
Ralink UBoot Version: 4.0.0.3_NDMS
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:May 31 2017  Time:15:07:28
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 575 MHZ ####
 estimate memory size = 64 Mbytes
 Firmware test register status: 0x00000000

Resetting MT7628 PHY...
Dual image:     on
Boot active:    1
Boot backup:    1
Boot fails:     0

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Enter boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial.
   9: Load Boot Loader code then write to Flash via TFTP.
3
You choosed 3
0

3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.167
   Created:      2020-01-29  16:05:35 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1592885 Bytes =  1.5 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...

[    0.000000] Linux version 4.14.167 (inflabz@PC) (gcc version 7.5.0 
   (OpenWrt GCC 7.5.0 r10911-c155900f66)) #0 Wed Jan 29 16:05:35 2020
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is ZyXEL Keenetic 4G III rev.B

Pictures

Retail Images
User Images

See also

List of ZyXEL Devices - Wireless Routers