ZyXEL LTE3301-M209
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LTE Indoor Router | |||||||||||||||||
 | |||||||||||||||||
| Homepage | Product page | ||||||||||||||||
| Support | Support page | ||||||||||||||||
| Wikipedia | ZyXEL | ||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Status Unknown | ||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | ZyXEL LTE3301-M209 | ||||||||||||||||
| FCC ID | none specified | ||||||||||||||||
| Type | wireless router | ||||||||||||||||
CPU1  | MediaTek MT7620N | ||||||||||||||||
| CPU1 Type | MIPS 24KEc | ||||||||||||||||
| CPU1 Speed | 580 MHz | ||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||
| Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||
| RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||
| ETH chip1 | MediaTek MT7620N | ||||||||||||||||
| Switch | MediaTek MT7620N | ||||||||||||||||
| Ethernet Port Count | 4-100MbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||
| Stock bootloader | U-Boot | ||||||||||||||||
| Expansion IF types | none specified | ||||||||||||||||
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||||||||||||||
|
Flags: | |||||||||||||||||
|
| |||||||||||||||||
|
| |||||||||||||||||
| Retail | |||||||||||||||||
| Availability | End of Life | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Chip1 | MediaTek MT7620N | ||||||||||||||||
| Wireless interface OUI | none specified | ||||||||||||||||
| Antenna Connector Type | none specified | ||||||||||||||||
| MIMO status | 2x2:2 | ||||||||||||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented ZyXEL devices with specifications, see ZyXEL.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Target: ramips
Subtarget: mt7620
Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: unknown
Subtarget: mt7620
Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: unknown
LAN Hardware: MediaTek MT7620N built-in
LAN Comment: 4x LAN only, the WAN side is the built-in LTE modem (USB 2020:2033, QMI). The modem takes up to one minute to enumerate after power-on.
WLAN Hardware: Calibration data is read out of the vendor config partition
USB SATA Comment: No external USB port; the internal USB2 bus carries the LTE modem
Installation method(s):
see devicepage, see git-commit
Install Comment:
Vendor recovery web UI only accepts the jboot record image (u-boot-install.bin), not factory.bin
Recovery method(s):
see devicepage
Recovery Comment:
Hold reset or WPS at power-on to start the U-Boot TFTP recovery
Comment:
OpenWrt replaces the AMIT "jboot" vendor bootloader with mainline U-Boot. Support pending, see openwrt/openwrt
LAN Comment: 4x LAN only, the WAN side is the built-in LTE modem (USB 2020:2033, QMI). The modem takes up to one minute to enumerate after power-on.
WLAN Hardware: Calibration data is read out of the vendor config partition
USB SATA Comment: No external USB port; the internal USB2 bus carries the LTE modem
Installation method(s):
see devicepage, see git-commit
Install Comment:
Vendor recovery web UI only accepts the jboot record image (u-boot-install.bin), not factory.bin
Recovery method(s):
see devicepage
Recovery Comment:
Hold reset or WPS at power-on to start the U-Boot TFTP recovery
Comment:
OpenWrt replaces the AMIT "jboot" vendor bootloader with mainline U-Boot. Support pending, see openwrt/openwrt
Please insert instructions here
