ZyXEL P-1302-T10B
bgn (N300) | |||||
|---|---|---|---|---|---|
| Wireless N ADSL2+ 4-port Gateway | |||||
| Wikipedia | |||||
| 3rd Party Firmware | |||||
| dd-wrt |
Status Unknown | ||||
| OpenWrt |
Status Unknown | ||||
| Tomato any flavor |
Incompatible | ||||
| Platform | |||||
| Brand • Model • Rev |
ZyXEL P-1302-T10B | ||||
| FCC ID | |||||
| Board ID |
2011500133 | ||||
| Type |
wireless router, dsl modem | ||||
| CPU1 |
Ralink RT63365E | ||||
| CPU1 Type |
MIPS 34KEc | ||||
| CPU1 Speed |
500 MHz | ||||
| Flash1 Chip |
Winbond Model? | ||||
| Flash1 Size |
? MiB | ||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
| RAM1 Chip |
EtronTech EM63A165TS-6G | ||||
| ETH chip1 |
Ralink RT63365E | ||||
| Switch |
Ralink RT63365E | ||||
| Ethernet Port Count |
4-100MbE-LAN | ||||
| Wired Standard |
IEEE 802.3i/3u | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| Power |
9 VDC, 0.85 A | ||||
| Connector type |
barrel | ||||
|
Flags: ADSL2+ | |||||
| Other | |||||
|
Default SSID: ZyXEL_XXXX (4 addl. devices) | |||||
| Manuf/OEM/ODM | |||||
| Retail | |||||
| FCC approval date | 19 August 2013 | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 |
Ralink Model? | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented ZyXEL device with specifications, see ZyXEL.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"2011500133" is silkscreened on the board in the FCC photos.
- The device may be using Airgain antennas. An additional model with a black case and external antennas (via RP-SMA connectors) is also shown in the photos.
The Wi-Fi radio is presumed to be from Ralink.
Default settings are per the FCC manual and label. They may be inaccurate.
The power supply shown in the FCC photos is a VASATA P090085-2B1 (100-240VAC ~ 50/60Hz, 0.3A -> 9VDC, 0.85A).
