ZyXEL WAP3205
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless N Access Point | |||||||||||||
Homepage | |||||||||||||
Wikipedia | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | |||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
ZyXEL WAP3205 | ||||||||||||
FCC ID | |||||||||||||
IC ID | |||||||||||||
Board ID |
M01-BG419-E10 | ||||||||||||
Type |
access point | ||||||||||||
CPU1 |
Ralink RT3052 | ||||||||||||
CPU1 Type |
MIPS 24KEc | ||||||||||||
CPU1 Speed |
384 MHz | ||||||||||||
Flash1 Chip |
Macronix MX29LV320DBTI-70G | ||||||||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||
RAM1 Chip |
ISSI Model? x 2 | ||||||||||||
ETH chip1 |
Ralink RT3052 | ||||||||||||
Switch |
Ralink RT3052 | ||||||||||||
Ethernet Port Count |
2-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
Stock bootloader |
U-Boot | ||||||||||||
Expansion IF types |
none specified | ||||||||||||
Power |
12 VDC, 1 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Other | |||||||||||||
Default SSID: ZyXEL (19 addl. devices) | |||||||||||||
Manuf/OEM/ODM |
AboCom WR5206 | ||||||||||||
3rd Party Firmware Support | |||||||||||||
Retail | |||||||||||||
FCC approval date | 08 October 2009 | ||||||||||||
(Est.) release date | 29 September 2009 | ||||||||||||
UPC |
760559116552 (UPC DB, On eBay) | ||||||||||||
ASIN | B002LITI7K | ||||||||||||
Country of manuf | Taiwan | ||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Ralink RT3052 | ||||||||||||
Wireless interface OUI |
CC:5D:4E | ||||||||||||
Antenna Connector Type |
RP-SMA | ||||||||||||
MIMO status |
2x2:2 | ||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
|
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented ZyXEL device with specifications, see ZyXEL.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"M01-BG419-E10" is silkscreened on the board.
- Per ZyXEL's manual, the default SSID is ZyXEL.
The board for this device appears to be identical to
- the ZyXEL NBG-419N v1 (AboCom WR5206).
Later update: it is in fact sharing the same hardware and FCC ID..
Links of Interest
- mhzkid's antenna kit listing on eBay (w/ an internal shot)
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 12.09
Current supported version: 19.07.10
Comment:
WAP3205 v1 works with fw images for NBG-419N
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 12.09
Current supported version: 19.07.10
Comment:
WAP3205 v1 works with fw images for NBG-419N
Please insert instructions here