ZyXEL XGS1210-12 rev B1
From TechInfoDepot
Jump to navigationJump to search
| 12-Port Web-Managed Multi-Gigabit Switch | ||||||||||
|
| ||||||||||
| Homepage | Product page | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 3rd Party Firmware | ||||||||||
| dd-wrt | Status Unknown | |||||||||
| OpenWrt | Supported | |||||||||
| Tomato any flavor | Incompatible | |||||||||
| Gargoyle | Status Unknown | |||||||||
| Platform | ||||||||||
| Brand • Model • Rev | ZyXEL XGS1210-12 rev B1 | |||||||||
| CPU1 | Realtek RTL9302B | |||||||||
| CPU1 Type | MIPS 34Kc | |||||||||
| CPU1 Speed | 800 MHz | |||||||||
| Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | |||||||||
| RAM1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | |||||||||
| ETH chip1 | Realtek RTL9302B | |||||||||
| Switch | Realtek RTL9302B | |||||||||
| Ethernet Port Count | 2-2.5GbE, 8-1GbE | |||||||||
| Ethernet connector | 8P8C | |||||||||
| Wired Standard | IEEE 802.3i/3u/3ab/3bz | |||||||||
| Auto-MDIX | unspecified | |||||||||
| Switch Class | managed | |||||||||
|
Ethernet OUI: none specified | ||||||||||
| Expansion IF types | none specified | |||||||||
| Stock bootloader | U-Boot | |||||||||
| Power | 12 VDC, 1.5 A | |||||||||
| Connector type | barrel | |||||||||
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | |||||||||
|
| ||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | |||||||||
| ||||||||||
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented ZyXEL devices with specifications, see ZyXEL.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: realtek
OpenWrt Subtarget: rtl930x
OpenWrt Package architecture: mips_24kc
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: rtl930x
OpenWrt Package architecture: mips_24kc
Support started version: unknown
Current supported version: snapshot
LAN Hardware: Realtek RTL9302B
WLAN Hardware: none
WLAN Hardware: none
Please insert instructions here