Belkin F9K1102 v2

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn (AN600)
N600 DB Wireless Dual-Band N+ Router
Belkin F9K1102 v1 01.jpg
Support
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Belkin F9K1102 v1
FCC ID
IC ID
Board ID
AD210A-1.6
Type
wireless router
Series
F9K1102
CPU1
Realtek RTL8197D
CPU1 Type
Lexra RLX5281
CPU1 Speed
not specified
Flash1 Chip
Macronix MX25L6406EM2I-12G
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
EtronTech EM6AB160TSD-5G
ETH chip1
Realtek RTL8197D
Switch
Realtek RTL8197D
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1 A
Connector type
barrel
Other
Manuf/OEM/ODM
Retail
FCC approval date 02 July 2012
Country of manuf China
Radio 1
Chip1
Realtek RTL8192CE
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
Realtek RTL8192DR
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Belkin F9K1102 v1BroadcomBroadcomBroadcom
Belkin F9K1102 v2RealtekRealtekRealtek
Belkin F9K1102 v3BroadcomBroadcomBroadcom

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Belkin device with specifications, see Belkin.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

"AD210A-1.6" is silkscreened on the board in the FCC photos.

This is the same board ID as the Belkin F9K1105 v2.

The Flash chip appears to be a MX25L6406EM2I-12G,

but this could be incorrect.

JTAG-Serial Info

Serial

Serial Pinouts

Serial speed: 38400 (8N1)
 < J22
1 - GND
2 - Tx
3 - Vcc
4 - Rx<
(38400 8N1)

Boot log

boot log
Booting...                                                                   
                                                                             
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@                                                                            
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c22017h 00000c2h 0000020h 0000017h 0000000h 0000017h 0800000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000080h 0001000h 0000800h 0000100h 0000010h 000004eh MX25L6405D
@                                                           
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
---RealTek(RTL8196D)at 2012.05.10-16:31+0800 v0.1 [16bit](620MHz)
no sys signature at 00010000!

[check_system_image] addred [0x05010000] ret [0]!!!!!!!!!!!!!!

[check_system_image] addred [0x05020000] ret [2]!!!!!!!!!!!!!!
no rootfs signature at 000F0000!
no rootfs signature at 00130000!
no rootfs signature at 00170000!
no rootfs signature at 00110000!
no rootfs signature at 00111000!
no rootfs signature at 00112000!
no rootfs signature at 00113000!
no rootfs signature at 00114000!
no rootfs signature at 00115000!
no rootfs signature at 00116000!
no rootfs signature at 00117000!
no rootfs signature at 00118000!
no rootfs signature at 00119000!
no rootfs signature at 0011A000!
no rootfs signature at 0011B000!
no rootfs signature at 0011C000!
no rootfs signature at 0011D000!
no rootfs signature at 0011E000!
no rootfs signature at 0011F000!
no rootfs signature at 00120000!
no rootfs signature at 00121000!
no rootfs signature at 00122000!
no rootfs signature at 00123000!
no rootfs signature at 00124000!
no rootfs signature at 00125000!
no rootfs signature at 00126000!
no rootfs signature at 00127000!
no rootfs signature at 00128000!
no rootfs signature at 00129000!
no rootfs signature at 0012A000!
no rootfs signature at 0012B000!
no rootfs signature at 0012C000!
no rootfs signature at 0012D000!
no rootfs signature at 0012E000!
no rootfs signature at 0012F000!
no rootfs signature at 00131000!
no rootfs signature at 00132000!
no rootfs signature at 00133000!
no rootfs signature at 00134000!
no rootfs signature at 00135000!
no rootfs signature at 00136000!
no rootfs signature at 00137000!
no rootfs signature at 00138000!
no rootfs signature at 00139000!
no rootfs signature at 0013A000!
no rootfs signature at 0013B000!
no rootfs signature at 0013C000!
no rootfs signature at 0013D000!
no rootfs signature at 0013E000!
no rootfs signature at 0013F000!
no rootfs signature at 00140000!
no rootfs signature at 00141000!
no rootfs signature at 00142000!
no rootfs signature at 00143000!
no rootfs signature at 00144000!
no rootfs signature at 00145000!
no rootfs signature at 00146000!
no rootfs signature at 00147000!
no rootfs signature at 00148000!
no rootfs signature at 00149000!
no rootfs signature at 0014A000!
no rootfs signature at 0014B000!
no rootfs signature at 0014C000!
no rootfs signature at 0014D000!
no rootfs signature at 0014E000!
no rootfs signature at 0014F000!
no rootfs signature at 00150000!
no rootfs signature at 00151000!
no rootfs signature at 00152000!
no rootfs signature at 00153000!
no rootfs signature at 00154000!
no rootfs signature at 00155000!
no rootfs signature at 00156000!
no rootfs signature at 00157000!
no rootfs signature at 00158000!
no rootfs signature at 00159000!
no rootfs signature at 0015A000!
no rootfs signature at 0015B000!
no rootfs signature at 0015C000!
no rootfs signature at 0015D000!
no rootfs signature at 0015E000!
no rootfs signature at 0015F000!
Scanning Flash Section 0...
Scanning Flash Section 1...
Flash Sector Number : 128.

***************************************************
    Sercomm Boot Version 0.0.7.0

***************************************************
Entering Firmware : Everything is OK.
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
start address: 0x80003470
CPU revision is: 0000dc02
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,38400 root=/dev/mtdblock2
icache: 64kB/32B, dcache: 32kB/32B, scache: 0kB/0B
NR_IRQS:48
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover: boot [early0] -> real [ttyS0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 55568k/65536k available (2705k kernel code, 9896k reserved, 704k data, 108k init, 0k highmem)
Calibrating delay loop... 616.44 BogoMIPS (lpj=308224)
Mount-cache hash table entries: 512
net_namespace: 528 bytes
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.11)
msgmni has been set to 108
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
Realtek GPIO Driver for Flash Reload Default
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x18002000 (irq = 8) is a 16550A
Driver 'sd' needs updating - please use bus_type methods
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
RTL8192C/RTL8188C driver version 1.4 (2010-12-22)
=====>>INSIDE rtl8192cd_init_one <<=====
PCIE reset (0) 
Do MDIO_RESET
98 - 40MHz Clock Source
Find Port=1 Device:Vender ID=819310ec
vendor_deivce_id=819310ec
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
PCIE reset (0) 
Do MDIO_RESET
98 - 40MHz Clock Source
Find Port=0 Device:Vender ID=819110ec
vendor_deivce_id=819110ec
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
=====>>EXIT rtl8192cd_init_one <<=====



Probing RTL8186 10/100 NIC-kenel stack size order[3]...
chip name: 8196C, chip revid: 0
NOT YET
eth0 added. vid=9 Member port 0x1...
eth1 added. vid=8 Member port 0x10...
eth2 added. vid=9 Member port 0x2...
eth3 added. vid=9 Member port 0x4...
eth4 added. vid=9 Member port 0x8...
[peth0] added, mapping to [eth1]...
SPI INIT
 ------------------------- Force into Single IO Mode ------------------------ 
|No chipID  Sft chipSize blkSize secSize pageSize sdCk opCk      chipName    |
| 0 c22017h  0h  800000h  10000h   1000h     100h   86    0   MX6405D/05E/45E|
 ---------------------------------------------------------------------------- 
SPI flash(MX6405D/05E/45E) was found at CS0, size 0x800000
Creating 7 MTD partitions on "flash_bank_1":
0x000000000000-0x000000020000 : "bootloader"
0x000000020000-0x000000160000 : "Kernel"
0x000000160000-0x0000007c0000 : "rootfs"
0x0000007c0000-0x0000007d0000 : "nvram"
0x0000007d0000-0x0000007e0000 : "nv_default"
0x0000007e0000-0x0000007f0000 : "crash_log"
0x0000007f0000-0x000000800000 : "reserve"
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
b8021000=10000001
b8021054=200000
reg e0=99
reg e1=ac
reg e2=98
reg e3=c1
reg e4=1
reg e5=89
reg e6=98
reg e7=1d
reg f0=fc
reg f1=8c
reg f2=0
reg f3=11
reg f4=fb
reg f5=d2
reg f6=0
rtl8652-ehci rtl8652-ehci.0: RTL8652 On-Chip EHCI Host Controller
rtl8652-ehci rtl8652-ehci.0: new USB bus registered, assigned bus number 1
read synopsys=0
read synopsys2=0
rtl8652-ehci rtl8652-ehci.0: irq 10, io base 0x18021000
rtl8652-ehci rtl8652-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
rtl8652-ohci rtl8652-ohci.0: RTL8652 OHCI
rtl8652-ohci rtl8652-ohci.0: new USB bus registered, assigned bus number 2
rtl8652-ohci rtl8652-ohci.0: irq 10, io mem 0x18020000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
Netlink[Kernel] create socket for igmp ok.
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 108k freed
init started:  BusyBox v1.1.0 (2013.08.23-06:43+0000) multi-call binary
Starting pid 685, console /dev/console: '/etc/rcS'
led_pb_api: module license 'Sercomm' taints kernel.
Disabling lock debugging due to kernel taint
Register LED ID <40>
Register LED ID <41>
Register LED ID <45>
Register LED ID <46>
Register LED ID <50>
Register LED ID <51>
Register LED ID <55>
Register LED ID <60>
Register LED ID <91>
Register LED ID <90>
min_time=1,max_time=10,
device wlan1-va0 entered promiscuous mode
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
sh: cannot create /proc/dnrk_ctl: Directory nonexistent
sh: cannot create /proc/dnrk_cfg: Directory nonexistent
sh: cannot create /proc/dnrk_ctl: Directory nonexistent
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
start dhcpd...
Starting sxuptpd
br0: port 1(eth0) entering forwarding state
killall: twonkyserver: no process killed
USB port mode selector has been enabled
Initializing USB port mode:
 port1 = NAS
 port2 = NAS
usbcore: registered new interface driver sxuptp_driver
Starting usbjcpd
Initialize Hotplug
Mount SysFS
Starting HotPlug:                       sxhotplugd
insmod USB Storage Module
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Initialize SX NAS Plus
Starting SX NAS Plus FSS Daemon:            /sbin/sxnas-fssd
Starting SX NAS Plus NS Daemon:             /sbin/sxnas-nsd
Starting jcpd
Daemonizing...
device wlan0 entered promiscuous mode
device wlan1 entered promiscuous mode
[PHY_ConfigMACWithParaFile][MACPHY_REG]
>>> 92D load PHYREG 

**********************************

** NOTE!! RTL8192D INTERNAL PA! **

**********************************
[phy_RF6052_Config_ParaFile][radio_a_intPA]
[phy_RF6052_Config_ParaFile][radio_b_intPA]
===> Load_92D_Firmware
Firmware check 8005(0)
[Load_92D_Firmware][rtl8192dfw_n]
<=== Load_92D_Firmware
>> IQK_92D_5G_n 
br0: port 2(wlan0) entering learning state
[PHY_ConfigMACWithParaFile][MACPHY_REG_92C]
===> Load_92C_Firmware
<=== Load_92C_Firmware
br0: port 3(wlan1) entering learning state
br1: port 1(wlan1-va0) entering learning state
br0: port 2(wlan0) entering forwarding state
br0: port 3(wlan1) entering forwarding state
br1: port 1(wlan1-va0) entering forwarding state
killall: iwcontrol: no process killed
killall: wscd: no process killed
>> IQK_92D_5G_n 

WiFi Simple Config v2.9-wps2.0 (2013.08.26-04:11+0000).

Register to wlan0
Register to wlan1
iwcontrol RegisterPID to (wlan0)
iwcontrol RegisterPID to (wlan1)
Register to wlan0
Register to wlan1
iwcontrol RegisterPID to (wlan0)
iwcontrol RegisterPID to (wlan1)
start_crond config = /tmp/cron.cfg
start httpd...
success.
killall: igd_upnpd: no process killed
start printk...
success.
read root xml mod file OK
success.
success.
kill udhcpc .................
Received SIGUSR2,will release IPping: sendto: Network is unreachable
ping: sendto: Network is unreachable
Starting pid 3697, console /dev/console: '/bin/sh'


BusyBox v1.1.0 (2013.08.23-06:43+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ #

Bootloader options

bootloader options
----------------- COMMAND MODE HELP ------------------
HELP (?)                                    : Print this help message
DB <Address> <Len>
DW <Address> <Len>
EB <Address> <Value1> <Value2>...
EW <Address> <Value1> <Value2>...
CMP: CMP <dst><src><length>
IPCONFIG:<TargetAddress>
AUTOBURN: 0/1
LOADADDR: <Load Address>
J: Jump to <TargetAddress>
FLR: FLR <dst><src><length>
FLW <dst_ROM_offset><src_RAM_addr><length_Byte> <SPI cnt#>: Write offset-data to SPI from RAM
MDIOR:  MDIOR <phyid> <reg>
MDIOW:  MDIOW <phyid> <reg> <data>
PHYR: PHYR <PHYID><reg>
PHYW: PHYW <PHYID><reg><data>
PORT1: port 1 patch for FT2
SC_DL     :Enter Sercomm download mode 
SCTFTP :RTL TFTP Server 
SCHTTP :Enter Sercomm http upgrade mode 
SC_LP    :Enter Sercomm loopback test sample mode 
SC_RAMTEST :Enter Sercomm ram test 
SC_NOR_RD : sc flash read debug command 
SC_NOR_WR : sc flash write byte debug command 
SC_NOR_ER : sc flash erase debug command 
SC_FL_MAP: sc flash print flash map out comand 
SC_PHY : sc phy debug command 
SC_SW : sc read/write switch register commamd 
SC_BTVER : sc show bootloader version,with build timestamp 
SC_CPUREG: sc cpu register debug command
SC_MP:  do booting 97d_92c_92d_nfjrom
SC_LED: sc led test debug command 
SC_GPIO: sc gpio test debug command 
SCLED_BLINK: sc led blink debug cmd

Partition layout (on stock firmware)

~ # cat /proc/mtd 
dev:    size   erasesize  name
mtd0: 00020000 00001000 "bootloader"
mtd1: 00140000 00001000 "Kernel"
mtd2: 00660000 00001000 "rootfs"
mtd3: 00010000 00001000 "nvram"
mtd4: 00010000 00001000 "nv_default"
mtd5: 00010000 00001000 "crash_log"
mtd6: 00010000 00001000 "reserve"