D-Link DAP-1325 A1
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
---|---|
N300 Wi-Fi Range Extender | |
Homepage | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
D-Link DAP-1325 rev A1 |
FCC ID | |
Type |
range extender |
CPU1 |
MediaTek MT7628NN |
CPU1 Speed |
580 MHz |
Flash1 Chip |
Winbond W25Q64JVSSIQ |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI NOR) |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2 SDRAM) |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
MediaTek MT7628NN |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
110-240 VAC ~ 50/60 Hz, ? A |
Connector type |
AC |
Serial Port (UART) |
yes, 3.3, 57600 / 8N1 |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
MediaTek MT7628NN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented D-Link device with specifications, see D-Link.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
The DAP-1325 N300 Wi-Fi Range Extender is a portable plug-in adapter that lets you extend an existing wireless network. Simply place it anywhere in your home to extend the range of your wireless network.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mipsel_24kc
Support started version: 22.03.0
Current supported version: 23.05.3
OpenWrt Target: ramips
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mipsel_24kc
Support started version: 22.03.0
Current supported version: 23.05.3
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
Row of 4 holes near LAN port, starting from square hole: 3.3V, TX,RX,GND