XiaoYu XY-C5
From TechInfoDepot
Jump to navigationJump to searchrouter | |
3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
XiaoYu XY-C5 |
Type |
router |
CPU1 | |
CPU1 Speed |
880 MHz ( 2 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 | |
Switch | |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
| |
Stock bootloader |
U-Boot |
Expansion IF types |
USB 3.0, SATA |
USB ports |
1 |
SATA Ports |
1 |
USB Hub Compatible |
Untested |
Serial Port (UART) |
yes, 3.3, 57600 / 8N1 |
Other | |
| |
3rd Party Firmware Support |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Overview
ASM1060 for SATA
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.3
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 23.05.3
Please insert instructions here