Elecom WRC-X3000GS2

From TechInfoDepot
(Redirected from ELECOM WRC-X3000GS2)
Jump to navigationJump to search
abgn+ac+ax (AX3000)
Wi-Fi 6(11ax) 2402+574Mbps Wi-Fi Gigabit Router
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Elecom WRC-X3000GS2
FCC ID none specified
Type wireless router
CPU1 checkY Qualcomm IPQ5018
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.0 GHz ( 2 cores )
Flash1 Chip Macronix MX35UF1G24AD-Z4I
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip Zentel A3T2GF40CBF-HP
ETH chip1 Qualcomm IPQ5018
Switch Qualcomm Atheros QCA8337
Ethernet Port Count 1-1GbE-WAN
4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: 38:97:A4 (1 E, 1 W)
Ethernet OUI: 38:97:A4 (1 E, 1 W)

Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, (115200 8N1)

Flags:
Wi-Fi 6

Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 Qualcomm IPQ5018
Wireless interface OUI 38:97:A4
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm QCN6102
Wireless interface OUI 38:97:A4
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 2402 Mbps
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Elecom devices with specifications, see Elecom.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),
• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

Target: qualcommax
Subtarget: ipq50xx
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.2
LAN Hardware: Qualcomm Atheros QCA8337
WLAN Hardware: Qualcomm IPQ5018, Qualcomm QCN6102
WLAN Comment: wifi is permanently disabled due to insufficient RAM
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >> 
qualcommax: add support for ELECOM WRC-X3000GS2
ELECOM WRC-X3000GS2 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
IPQ5018.

Specification:

- SoC             : Qualcomm IPQ5018
- RAM             : DDR3 256 MiB (Zentel A3T2GF40CBF-HP)
- Flash           : SPI-NAND 128 MiB (Macronix MX35UF1G24AD-Z4I)
- WLAN            : 2.4/5 GHz 2T2R
  - 2.4 GHz       : Qualcomm IPQ5018 (SoC)
  - 5 GHz         : Qualcomm Atheros QCN6102
- Ethernet        : 5x 10/100/1000 Mbps
  - wan (phy)     : Qualcomm IPQ5018 (SoC)
  - lan (switch)  : Qualcomm Atheros QCA8337
- LEDs/Keys (GPIO): 8x/3x
- UART            : through-hole on PCB, 4pins near the barcode
  - assignment    : 3.3V, TX, RX, NC, GND from the barcode side
  - settings      : 115200n8
- Power           : 12 VDC, 1 A (Max. 11.5W)

Flash instruction using initramfs-factory.bin image:

1. Boot WRC-X3000GS2 normally with router mode
2. Access to the WebUI ("http://192.168.2.1/") on the device and open
   the firmware update page ("ファームウェア更新")
3. Select the OpenWrt factory.bin image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

Switching to the stock firmware:

1. Load the elecom.sh script

   . /lib/upgrade/elecom.sh

2. Check the current index of rootfs

   bootconfig_rw_index 0:bootconfig rootfs

3. Set the index to inverted value

   bootconfig_rw_index 0:bootconfig rootfs <value>
   bootconfig_rw_index 0:bootconfig1 rootfs <value>

   example:

   - step2 returned "0":

     bootconfig_rw_index 0:bootconfig rootfs 1
     bootconfig_rw_index 0:bootconfig1 rootfs 1

   - step2 returned "1":

     bootconfig_rw_index 0:bootconfig rootfs 0
     bootconfig_rw_index 0:bootconfig1 rootfs 0

4. Reboot

Partition Layout (Stock FW):

0x000000000000-0x000000080000 : "0:SBL1"
0x000000080000-0x000000100000 : "0:MIBIB"
0x000000100000-0x000000140000 : "0:BOOTCONFIG"
0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
0x000000180000-0x000000280000 : "0:QSEE"
0x000000280000-0x000000380000 : "0:QSEE_1"
0x000000380000-0x0000003c0000 : "0:DEVCFG"
0x0000003c0000-0x000000400000 : "0:DEVCFG_1"
0x000000400000-0x000000440000 : "0:CDT"
0x000000440000-0x000000480000 : "0:CDT_1"
0x000000480000-0x000000500000 : "0:APPSBLENV"
0x000000500000-0x000000640000 : "0:APPSBL"
0x000000640000-0x000000780000 : "0:APPSBL_1"
0x000000780000-0x000000880000 : "0:ART"
0x000000880000-0x000000900000 : "0:TRAINING"
0x000000900000-0x000003c40000 : "rootfs"
0x000003c40000-0x000003fc0000 : "Config"
0x000003fc0000-0x000007300000 : "rootfs_1"
0x000007300000-0x000007680000 : "Config_2"
0x000007680000-0x000007b80000 : "Reserved"
0x000007b80000-0x000007c00000 : "FWHEADER"
0x000007c00000-0x000007c80000 : "Factory"

Known Issues:

- All Wi-Fi related peripherals are disabled.
  This device has only 256 MiB RAM and it's too few for ath11k. To
  prevent OOM when using LuCI or other softwares, disable Wi-Fi related
  peripherals in device tree at the moment.

- This device has a Macronix MX35UF1G24AD SPI-NAND chip registered as
  oobsize=128 in Linux Kernel. But using BCH8 breaks I/O on the chip
  with the following errors, so this support uses BCH4 instead.

  root@OpenWrt:~# strings /dev/mtdblock10
  [26427.133154] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead.
  [26427.134125] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
  [26427.142240] I/O error, dev mtdblock10, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
  [26427.151427] I/O error, dev mtdblock10, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
  [26427.160440] I/O error, dev mtdblock10, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  [26427.169619] I/O error, dev mtdblock10, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
  [26427.178083] Buffer I/O error on dev mtdblock10, logical block 0, async page read

Notes:

- This device has dual-boot feature and it's managed by the index in the
  0:bootconfig and 0:bootconfig1 partitions.

MAC Addresses:

LAN    : 38:97:A4:xx:xx:60 (0:APPSBLENV, "eth1addr"/"ethaddr"  (text))
WAN    : 38:97:A4:xx:xx:63 (0:APPSBLENV, "eth0addr" (text))
2.4 GHz: 38:97:A4:xx:xx:61 (0:APPSBLENV, "wifi0"    (text))
5 GHz  : 38:97:A4:xx:xx:62 (0:APPSBLENV, "wifi1"    (text))
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Elecom_WRC-X3000GS2&oldid=537977"