ZyXEL Keenetic KN-3211 (Buddy 4)
From TechInfoDepot
(Redirected from Keenetic KN-3211 (Buddy 4))
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| Mesh-Capable N300 Wi-Fi Range Extender | |
|
| |
| Homepage | Product page |
| Wikipedia | ZyXEL |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | ZyXEL Keenetic KN-3211 (Buddy 4) |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | range extender |
| CPU1 | MediaTek MT7628AN |
| CPU1 Type | MIPS 24KEc |
| CPU1 Speed | 575 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | MediaTek MT7628AN |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| Power | 220-240 VAC ~ ? Hz, ? A |
| Connector type | AC |
| Serial Port (UART) | yes, 3.3, 115200 / 8N1 |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | MediaTek MT7628AN |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented ZyXEL devices with specifications, see ZyXEL.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: ramips
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mt76x8
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mt76x8
Support started version: unknown
Current supported version: snapshot
WLAN Hardware: MediaTek MT7628AN
Please insert instructions here