+Ethernet eth0: MAC address 00:00:01:02:03:04
IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.1.254
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version v2_0 - built 18:31:11, Aug 4 2005
Platform: PC (I386)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x000f0000, 0x00072ed0-0x000a0000 available
ver 00:0003 05-24-05
<press Ctrl+C to enter prompt mode>
# Activate RDC-Keilven's RS232 Patch V2
RedBoot>
# Kernel size = 726210 bytes
# FW size = 2651392 bytes
# fwcheck: base = 0x00400000, size = 0x00000400
# Firmware Checksum O.K
# Kernel copying......BEGIN
# Kernel copying......FINISH
mem_size: 1000000
Linux version 2.4.29 (tom@localhost) (gcc version 3.4.1) #146 Mon Jan 23 02:44:10 EST 2006
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000001000000 (usable)
16MB LOWMEM available.
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: console=ttyS0,38400 root=/dev/mtdblock1 noinitrd
Initializing CPU#0
Calibrating delay loop... 49.86 BogoMIPS
Memory: 14288k/16384k available (1068k kernel code, 1708k reserved, 192k data, 76k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
CPU: Cyrix Cx486SLC
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
rdc: RDC R6040 net driver, version 0.6 (9July2004)
rdc: RDC R6040 net driver, version 0.6 (9July2004)
rdc: RDC R6040 net driver, version 0.6 (9July2004)
PPP generic driver version 2.4.2
flash device: 400000 at ffc00000
## Decide to use AMD/Fujitsu Standard command set.
## MFG ID = 0x007F, DEV ID = 0x22F6
Total size = 4 MB
Creating 5 MTD partitions on "RDC3210 Flash":
0x00000000-0x003c0000 : "linux"
0x000b1500-0x003c0000 : "romfs"
mtd: partition "romfs" doesn't start on an erase block boundary -- force read-only
0x003c0000-0x003d0000 : "nvram"
0x003d0000-0x003e0000 : "factory"
0x003e0000-0x00400000 : "bootldr"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 340 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 76k freed
BusyBox v1.00 (2006.01.23-05:59+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
# #sysinit: [sysinit]
Using /etc/resetDefault.o
Using /etc/RDC_reboot.o
---- Restarting system ----
---- Enable Watchdog ----
# update nvram with default list!
# interfaces_init......
Using /etc/rt61ap.o
Setting ra0 configuration....
CountryRegion=5
BssidNum=1
SSID=linksys
WirelessMode=0
TxRate=0
Channel=6
BeaconPeriod=100
DtimPeriod=1
TxPower=100
BGProtection=0
RTSThreshold=2346
FragThreshold=2346
TxBurst=1
ShortSlot=1
PktAggregate=1
NoForwarding=0
NoForwardingBTNBSSID=0
HideSSID=0
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
WdsEnable=0
WdsList=
WdsKey=
WdsEncrypType=NONE
AutoChannelSelect=0
RekeyInterval=3600
WPAPSK=
AccessPolicy0=0
RADIUS_Server=0.0.0.0
RADIUS_Port=1812
RADIUS_Key=
own_ip_addr=192.168.1.1
session_timeout_interval=0
DisableOLBC=1
WmmCapable=0
AckPolicy=0;0;0;0
APAifsn=3;7;1;1
APCwmin=4;4;3;2
APCwmax=6;10;4;3
APTxop=0;0;94;47
APACM=0;0;0;0
BSSAifsn=3;7;2;2
BSSCwmin=4;4;3;2
BSSCwmax=10;10;4;3
BSSTxop=0;0;94;47
BSSACM=0;0;0;0
TxAntenna=1
AuthMode=WEPAUTO
EncrypType=NONE
DefaultKeyID=1
BasicRate=15
IEEE8021X=0
device eth1 entered promiscuous mode
device ra0 entered promiscuous mode
ra0: attempt to add interface with same source address.
br0: port 2(ra0) entering listening state
br0: port 1(eth1) entering listening state
# lan services init......
Configuration file: /var/RT61AP/RT61AP.dat
conf->SsidNum=1
IP address: '0.0.0.0'
RADIUS_Port: '1812'
Line 39: empty shared secret is not allowed.
RADIUS_Key: '', Key_len: 0
session_timeout policy = not use
Read Session Timeout Interval 0 seconds.
Set Session Timeout Interval 3600 seconds.
1 errors found in configuration file '/var/RT61AP/RT61AP.dat'
Could not allocate memory for rtapd->conf
This is the parent process, pid = 51
Start UPnP
Start tftpd
This is the child process, pid = 60
easytest: No such file or directory
route: resolving gw
Dante's tiny TFTP Server is ready on port 69
route: resolving gw
route: resolving gw
route: resolving gw
route: resolving gw
# wan_init......
httpd : This is httpd...ssl_enabled is 0
|