Banana Pi BPI R4 Pro 4E
From TechInfoDepot
(Redirected from Sinovoip BananaPi BPi-R4 Pro 4E)
| Banana Pi BPI-R4 Pro Wi-Fi 7 Router | |||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||
| Homepage | Product page | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3rd Party Firmware | |||||||||||||||||||||||||||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||||||||||||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||||||||||||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||||||||||||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||||||||||||||||||||||||||
| Platform | |||||||||||||||||||||||||||||||||||||||||
| Brand • Model • Rev | Banana Pi BPI R4 Pro 4E | ||||||||||||||||||||||||||||||||||||||||
| Type | single-board computer | ||||||||||||||||||||||||||||||||||||||||
| CPU1 | MediaTek MT7988A | ||||||||||||||||||||||||||||||||||||||||
| CPU1 Type | ARM Cortex-A73 | ||||||||||||||||||||||||||||||||||||||||
| CPU1 Speed | 1.8 GHz ( 4 cores ) 64-bit | ||||||||||||||||||||||||||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||||||||||||||||||||||||||
| Flash1 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (SPI NAND) | ||||||||||||||||||||||||||||||||||||||||
| Flash2 Size | 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMC) | ||||||||||||||||||||||||||||||||||||||||
| RAM1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (DDR4) | ||||||||||||||||||||||||||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||||||||||||||||||||||||||
| ETH chip1 | MediaTek MT7988A | ||||||||||||||||||||||||||||||||||||||||
| ETH chip2 | MaxLinear MXL86252C | ||||||||||||||||||||||||||||||||||||||||
| Ethernet Port Count |
1-2.5GbE-WAN 1-2.5GbE-LAN | ||||||||||||||||||||||||||||||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab/3bz | ||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||
| Stock bootloader | U-Boot | ||||||||||||||||||||||||||||||||||||||||
| Expansion IF types | microSD Slot, SFP, 2x mini-PCIe 3.0 2-lane, 2x M.2 M-Key 3.0 1-lane, 3x M.2 B-Key, USB 2.0, USB 3.0 | ||||||||||||||||||||||||||||||||||||||||
| Mini PCIe slots | 2 | ||||||||||||||||||||||||||||||||||||||||
| USB ports | 2 | ||||||||||||||||||||||||||||||||||||||||
| SD/MMC Slots | 1 | ||||||||||||||||||||||||||||||||||||||||
| SFP ports | 2 | ||||||||||||||||||||||||||||||||||||||||
| M.2 Slots | 5 | ||||||||||||||||||||||||||||||||||||||||
| USB Hub Compatible | Untested | ||||||||||||||||||||||||||||||||||||||||
| Power | 12-24 VDC, ? A | ||||||||||||||||||||||||||||||||||||||||
| Connector type | barrel | ||||||||||||||||||||||||||||||||||||||||
| Serial Port (UART) | yes, (115200 8N1) | ||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||
| Other | |||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||
For a list of all currently documented MaxLinear (Intel) chipsets with specifications, see MaxLinear (Intel).
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Banana Pi devices with specifications, see Banana Pi.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
Target: mediatek
Subtarget: mt7621
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
Subtarget: mt7621
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
LAN Hardware: MaxLinear MxL86252C, MediaTek MT7988A
LAN Comment: 1 2.5Gb SFP shared w/ 1 2.5GbE
WLAN Hardware: none
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
LAN Comment: 1 2.5Gb SFP shared w/ 1 2.5GbE
WLAN Hardware: none
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
| git • >> |
|---|
mediatek: add support for BananaPi BPi-R4 Pro 4E
The BPi-R4 Pro 4E is a Wi-Fi 7 router board based on the MT7988A SoC.
Difference to 8X is that board has only 4GB RAM and does not contain
the Aeonsemi 10G phys.
Wan port uses MT7988 internal 2.5GBit/s phy with no ethmux chip between
so it need overlays to switch between this wan-phy and SFP-Slot.
Specification
-------------
- SoC: Mediatek MT7988A (4x Cortex-A73 @1.8GHz)
- RAM: 4GB DDR4
- Flash: 256MB SPI-NAND, 8GB eMMC, microSD Slot
- Switch: MT7988A built-in switch, MxL86252C
- Ports: 9 ports, 8 usable simultaneously
* 2x 1G RJ45 LAN
* 4x 2.5G RJ45 LAN
* 1x SFP (LAN)
* 1x 2.5G RJ45/SFP Combo (WAN)
- Buttons: Reset, WPS
- LEDs: Power
- USB: On-board VIA VL822 USB3.2/USB2.0 hub
* 1x USB-A 2.0 connector
* 1x USB-A 3.2 connector
* 3x NGFF-KEYB
- PCIe:
* 2x mini-PCIe slots with PCIe 3.0 2-lane interface
* 2x M.2 M-Key slots with PCIe 3.0 1-lane interface (switchable
PCIe signal with M.2 B-Key)
- Debug: USB Type-C console port
- Power: USB Type-C PD 20V or DC barrel connector
Note: This device comes without a MAC address programmed from the
factory. The randomly generated MAC is stored in the U-Boot env on first
boot and used persistently afterwards.
Installation
------------
Uncompress *sdcard.img.gz and write to microSD card, eg. using 'dd'. Use
bootloader menu on the serial console to install SPI-NAND once installed
to SPI-NAND you can used the bootloader menu to install to eMMC. See
instructions for BananaPi R4 for details.
Description is taken from 8X patch and changed to 4E variant.
R4Pro needed a patch for adding aliases to ensure right probe order so add
this here too.
Co-authored-by: Wilfried Teiken
Signed-off-by: Frank Wunderlich
|