TP-LINK Archer C60 v2.0

From TechInfoDepot
(Redirected from TP-Link Archer C60 v2)
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1350)
AC1350 Wireless Dual Band Router
Homepage Product page
Wikipedia TP-Link
WikiDevi.wi-cat.ru TP-LINK Archer C60 v2.0
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev TP-LINK Archer C60 v2.x
FCC ID TE7C60
IC ID 8853A-C60
Board ID 2050500733
Type wireless router
Series Archer C60
CPU1 checkY Qualcomm Atheros QCA9561
CPU1 Type MIPS 74Kc
CPU1 Speed 775 MHz
Flash1 Chip GigaDevice GD25Q64CSIG
Flash1 Size 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI NOR)
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2)
RAM1 Chip Winbond W9751G6KB-25
ETH chip1 Qualcomm Atheros QCA9561
Switch Qualcomm Atheros QCA9561
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: F4:F2:6D (5 E, 5 W)
Ethernet OUI: F4:F2:6D (5 E, 5 W)

Stock bootloader U-Boot 1.1.4 AP151 (Dragonfly 1.0)
Stock FW OS Linux 3.3.8
Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
Other

Default SSID: TP-LINK_XXXX (47 addl. devices)
, TP-LINK_XXXX_5G (25 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 825 additional devices
of which 110 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1358 additional devices
of which 283 are TP-LINK devices

Manuf/OEM/ODM TP-LINK
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
End of Life date 2020
FCC approval date 09 December 2016
ASIN B01LX8Z8TP , 
multiple uses
Country of manuf China
Radio 1
Chip1 Qualcomm Atheros QCA9561
Wireless interface OUI F4:F2:6D
Antenna Connector Type U.FL
MIMO status 3x3:3
Wireless Standard IEEE 802.11b/g/n
802.11n up to 450 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm Atheros QCA9886
Wireless interface OUI F4:F2:6D
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 FCC ID
TP-LINK Archer C60 v1.xTE7C60
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
TP-LINK Archer C60 v1.xQualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK Archer C60 v2.0Qualcomm AtherosQualcomm AtherosQualcomm Atheros
TP-LINK Archer C60 v3.0Qualcomm AtherosQualcomm AtherosQualcomm Atheros

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.),
• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1350 class

Overview

"2050500733" and "1619" is silkscreened on the board in the FCC photos.

Archer C60(RU) Ver:2.0 (label) - id:52550000 (4pda)
CPU: Qualcomm Atheros QCA9561/QCA9886 (GitHub)
"SupportList:\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:00000000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:52550000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n"
See also: TP-LINK Archer C60 v1.x and TP-LINK Archer C59 v2.x
This device would seem to be using Archer C60(EU) Ver:1.0 (label):
Qualcomm Atheros QCA9561-AL3A - WiSoC 3x3 802.11bgn (2.4GHz)
Qualcomm Atheros QCA9886 - 2x2 802.11an/ac (5GHz radio)

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 18.06.0
Current supported version: 25.12.1
LAN Hardware: Qualcomm Atheros QCA9561
WLAN Hardware: Qualcomm Atheros QCA9561, Qualcomm Atheros QCA9886
WLAN Comment: 2.4Ghz 3x3:3 MIMO, 5Ghz 2x2:2 MIMO
Installation method(s):
GUI OEM, U-Boot TFTP recovery, U-Boot TFTP + serial recovery, see git-commit
Install Comment:
For TFTP, rename OpenWrt factory image to tp_recovery.bin, see ath79 git-commit
Recovery method(s):
U-Boot TFTP recovery, U-Boot TFTP + serial recovery, see git-commit
Recovery Comment:
For TFTP, rename OpenWrt factory image to tp_recovery.bin, see ath79 git-commit
git • >> 
ar71xx: add support for TP-Link Archer C60 v2
TP-Link Archer C60 v2 is a dual-band AC1350 router, based on
Qualcomm/Atheros QCA9561 + QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Flash instruction (web):

Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use
OEM System Tools - Firmware Upgrade site.

Flash instruction (recovery):

1. Set PC to fixed IP address 192.168.0.66
2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and
   rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root
   directory
4. Turn off the router
5. Press and hold reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time the firmware should
   be transferred from the tftp server
8. Wait ~30 second to complete recovery

Flash instruction (under U-Boot, using UART):

tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize
reset

Pictures

Retail Images
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=TP-LINK_Archer_C60_v2.0&oldid=518324"