AboCom AP700C

b (B11)
11Mbps 802.11b Wireless Access Point
Downloads	Download page
WikiDevi.wi-cat.ru	AboCom AP700C
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	AboCom AP700C
FCC ID	MQ4AP700C
Type	access point
CPU1 Y	Realtek RTL8181
CPU1 Type	Lexra LX5280
CPU1 Speed	not specified
Flash1 Chip	Macronix Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Realtek RTL8181
ETH chip2	Realtek RTL8201CP
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, ? A
Connector type	barrel
Additional chips 2.4GHz Power Amplifier IC;GATAX;;G W22, ????A, WP02;1;
Other
Default IP address: 192.168.100.252 the IP 192.168.100.252 is used by 4 additional devices of which 1 are AboCom devices
Manuf/OEM/ODM	AboCom
Retail
FCC approval date	17 August 2004
Country of manuf	Taiwan
Radio 1
Chip1	Realtek RTL8181
Chip2	Philips SA2400A
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Philips chipsets with specifications, see Philips.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented AboCom devices with specifications, see AboCom.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"M01-AP700-X20" is silkscreened on the board in the FCC photos.

The manual says the default SSID is 802.11bAP.

The power adapter shown in the FCC photos is a TECHNICS TESA2-0503000d (100-240VAC ~ 50/60Hz, 0.40A max. -> 5VDC, 3.0A).