Actiontec C1000A (CenturyLink)
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| CenturyLink Wireless-N VDSL2 Modem Router | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Status Unknown |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Actiontec C1000A (CenturyLink) |
| FCC ID | |
| Type |
wireless router, dsl modem, analog phone gateway |
| CPU1 |
Broadcom BCM63168 |
| CPU1 Type |
BMIPS4350 |
| CPU1 Speed |
400 MHz ( 2 cores ) |
| Flash1 Chip |
STMicro NAND512W3A2SN6 |
| Flash1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
SK hynix H5PS5162GFR-Y5C |
| ETH chip1 |
Broadcom BCM63168 |
| Switch |
Broadcom BCM53125 |
| Ethernet Port Count |
4-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
| Stock bootloader |
CFE 1.0.38-112.14 BCM963268 |
| Stock FW OS |
Linux 2.6.30 |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1.5 A |
| Serial Port (UART) |
yes, internal, 6-pin header, populated, 3.3V TTL, J505, (115200 8N1) |
|
Flags: VDSL2, ADSL2+ | |
| Other | |
|
Default SSID: CenturyLinkXXXX (3 addl. devices) | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | common |
| FCC approval date | 28 April 2012 |
| UPC |
789286808226 (UPC DB, On eBay) |
| ASIN |
B008EM6XBQ  |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM63168 |
| Wireless interface OUI |
20:76:00 |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Actiontec device with specifications, see Actiontec.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"Actiontec" and "06713B" is silkscreened on the board in
- the FCC photos as well as a production model board.
The FCC photos are not terribly illuminating for this device.
- The logs below indicate the switch used is a BCM53125.
Links of Interest
Specifications
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
Support started version: ?
Current supported version: ?
Unsupported Functions:
DSL
On the OpenWrt Wiki
On the OpenWrt Forum
Support started version: ?
Current supported version: ?
Unsupported Functions:
DSL
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
(...) (...) (...) (TxD) (RxD) (GND)
J505
--------------> to SoC + heatsink assembly
Credentials
They're the same as the factory default credentials on the label.
Info derived from
| boot log |
|---|
HELO
CPUI
L1CI
HELO
CPUI
L1CI
DRAM
----
PHYS
STRF
400H
PHYE
DDR2
DINT
USYN
LSYN
MFAS
LMBE
RACE
PASS
----
ZBSS
CODE
DATA
L12F
MAIN
NAN0
BT28
0002
NAN9
BT29
1889
NAN9
NAN3
RFS2
NAN5
CFE version 1.0.38-112.14 for BCM963268 (32bit,SP,BE)
Build Date: Wed May 23 21:23:06 PDT 2012 (wayne@wayne-desktop)
Copyright (C) 2000-2011 Broadcom Corporation.
NAND flash device: name ST NAND512W3A2CN6, id 0x2076 block 16KB size 65536KB
External switch id = 53125
Chip ID: BCM63168C0, MIPS: 400MHz, DDR: 400MHz, Bus: 200MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-13) : C1000B
Number of MAC Addresses (1-32) : 16
Base MAC Address : 20:76:00:52:f1:e0
PSI Size (1-64) KBytes : 64
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
Board Serial Number : CVPA2201000831
Factory FW Version : CAC001-31.30L.8
WPS PIN : 12720170
WPA KEY : 862qr6g72apfxz
Admin Password : 5Ud9iz7p
This is one CFE built for CENTURYLINK C1000A
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from latest image (0xb9d80000) ...
Decompression OK!
Entry at 0x8032a640
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x8032a640
Linux version 2.6.30 (wayne@wayne-desktop) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #3 SMP PREEMPT Wed May 23 21:24:30 PDT 2012
BCM Flash API. Flash device is not found.
C1000B prom init
DSL SDRAM reserved: 0x132000
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00003ece
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00003ece
On node 0 totalpages: 16078
free_area_init_node: node 0, pgdat 804013f0, node_mem_map 81000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 94 pages used for memmap
Normal zone: 11888 pages, LIFO batch:1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 15952
Kernel command line: root=mtd:rootfs ro rootfstype=jffs2 console=ttyS0,115200
wait instruction: enabled
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
PID hash table entries: 256 (order: 8, 1024 bytes)
Allocating memory for DSP module core and initialization code
Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0
Calibrating delay loop... Mount-cache hash table entries: 512
Broadcom Logger v0.1 May 23 2012 20:25:21
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Total Flash size: 0K with -1 sectors
Internal 1P2 VREG will be shutdown if unused...Used, leave it on (0000868b-00008137=1364>=300)
registering PCI controller with io_map_base unset
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
pci 0000:00:00.0: reg 10 32bit mmio: [0x10004000-0x10013fff]
pci 0000:00:00.0: reg 30 32bit mmio: [0x000000-0x0007ff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff]
pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff]
PCI: Setting latency timer of device 0000:01:00.0 to 64
BLOG v3.0 Initialized
BLOG Rule v1.0 Initialized
Broadcom IQoS v0.1 May 23 2012 20:30:12 initialized
Broadcom GBPM v0.1 May 23 2012 20:30:13 initialized
PCI: Setting latency timer of device 0000:01:00.0 to 64
Driver 'sd' needs updating - please use bus_type methods
bcm963xx_mtd driver v1.0
##init_brcm_physmap exit
-->brcmnand_scan: CS=0, numchips=1, csi=0
NAND_CS_NAND_XOR=00000000
Disabling XOR on CS#0
brcmnand_scan: Calling brcmnand_probe for CS=0
B4: NandSelect=40000001, nandConfig=04042300, chipSelect=0
brcmnand_read_id: CS0: dev_id=20762076
After: NandSelect=40000001, nandConfig=04042300
Block size=00004000, erase shift=14
timing1 not adjusted: 6574845b
timing2 not adjusted: 00001e96
brcmnand_adjust_acccontrol: gAccControl[CS=0]=00000000, ACC=f7ff1010
brcmnand_scan: Done brcmnand_probe
brcmnand_scan: B4 nand_select = 40000001
brcmnand_scan: After nand_select = 40000001
100 CS=0, chip->ctrl->CS[0]=0
ECC level 15, threshold at 1 bits
reqEccLevel=0, eccLevel=15
190 eccLevel=15, chip->ecclevel=15, acc=f7ff1010
brcmnand_scan 10
200 CS=0, chip->ctrl->CS[0]=0
200 chip->ecclevel=15, acc=f7ff1010
brcmnand_scan 220
brcmnand_scan 230
brcmnand_scan 40, mtd->oobsize=16, chip->ecclayout=00000000
brcmnand_scan 42, mtd->oobsize=16, chip->ecclevel=15, isMLC=0, chip->cellinfo=0
300 CS=0, chip->ctrl->CS[0]=0
500 chip=83a30190, CS=0, chip->ctrl->CS[0]=0
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0001ffe0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0001ffc0, version 0x01 for chip on CS0
brcmnand_scan 99
Creating 6 MTD partitions on "brcmnand.0":
0x000001d84000-0x000003afc000 : "rootfs"
0x000000008000-0x000001d80000 : "rootfs_update"
0x000003b00000-0x000003f00000 : "data"
0x000000000000-0x000000004000 : "nvram"
0x000001d80000-0x000001d84000 : "tag"
0x000000004000-0x000000008000 : "tag_update"
PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:09.0 to 64
brcmboard: brcm_board_init entry
SES: Button Interrupt 0x1 is enabled
SES: LED GPIO 0x8012 is enabled
PCIe: No device found - Powering down
bcmPktDma_init: Broadcom Packet DMA Library initialized
Total # RxBds=1448
bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
bcmxtmrt: Broadcom BCM3168C0 ATM/PTM Network Device v0.4 May 23 2012 20:29:48
IPSEC SPU: SUCCEEDED
GACT probability NOT on
Mirror/redirect action on
u32 classifier
input device check on
Actions configured
VFS: Mounted root (jffs2 filesystem) readonly on device 31:0.
init started: BusyBox v1.00 (2012.05.24-03:34+0000) multi-call binary
jffs2_scan_dirent_node(): Node CRC failed on node at 0x002607e8: Read 0xffffffff, calculated 0x57bdeef6
BusyBox v1.00 (2012.05.24-03:34+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
bcm_ingqos: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Broadcom Ingress QoS Module Char Driver v0.1 May 23 2012 20:28:19 Registered<243>
Broadcom Ingress QoS ver 0.1 initialized
BPM: tot_mem_size=67108864B (64MB), buf_mem_size=10066329B (9MB), num of buffers=4802, buf size=2096
Broadcom BPM Module Char Driver v0.1 May 23 2012 20:26:31 Registered<244>
[NTC bpm] bpm_set_status: BPM status : enabled
NBUFF v1.0 Initialized
Initialized fcache state
Broadcom Packet Flow Cache Char Driver v2.2 May 23 2012 20:28:20 Registered<242>
Created Proc FS /procfs/fcache
Broadcom Packet Flow Cache registered with netdev chain
Broadcom Packet Flow Cache learning via BLOG enabled.
Constructed Broadcom Packet Flow Cache v2.2 May 23 2012 20:28:20
chipId 0x631680C0
Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 May 23 2012 20:27:48 Registered <241>
FAP Debug values at 0x00000010 0x00000010
Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000
FAP Soft Reset Done
4ke Reset Done
Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000
FAP Soft Reset Done
4ke Reset Done
Allocated FAP0 GSO Buffers (0xA2B9C6E4) : 1048576 bytes @ 0xA2500000
Allocated FAP1 GSO Buffers (0xA241C6E4) : 1048576 bytes @ 0xA2600000
[NTC fapProto] fapReset : Reset FAP Protocol layer
bcmPktDma_bind: FAP Driver binding successfull
[FAP0] DSPRAM : stack <0x80000000><1024>, global <0x80000400><7120>, free <48>, total<8192>
[FAP1] DSPRAM : stack <0x80000000><1024>, global <0x80000400><7120>, free <48>, total<8192>
[FAP0] PSM : addr<0x80002000>, used <24536>, free <40>, total <24576>
[FAP1] PSM : addr<0x80002000>, used <24536>, free <40>, total <24576>
[FAP0] Flows supported: 238 (dsp 61, psm 75, qsm 102)
[FAP1] Flows supported: 238 (dsp 61, psm 75, qsm 102)
[FAP0] DQM : availableMemory 14012 bytes, nextByteAddress 0xE0010944
[FAP1] DQM : availableMemory 14012 bytes, nextByteAddress 0xE0010944
[FAP0] GSO Buffer set to 0xA2500000
[FAP1] GSO Buffer set to 0xA2600000
[FAP0] FAP BPM Initialized.
[FAP1] FAP BPM Initialized.
bcmxtmcfg: bcmxtmcfg_init entry
adsl: adsl_init entry
Broadcom BCM63168C0 Ethernet Network Device v0.1 May 23 2012 20:29:41
fapDrv_psmAlloc: fapIdx=0, size: 3600, offset=b08206f0 bytes remaining 7408
ETH Init: Ch:0 - 180 tx BDs at 0xb08206f0
fapDrv_psmAlloc: fapIdx=1, size: 3600, offset=b0a206f0 bytes remaining 7408
ETH Init: Ch:1 - 180 tx BDs at 0xb0a206f0
fapDrv_psmAlloc: wastage 8 bytes
fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b0821500 bytes remaining 2592
ETH Init: Ch:0 - 600 rx BDs at 0xb0821500
fapDrv_psmAlloc: wastage 8 bytes
fapDrv_psmAlloc: fapIdx=1, size: 4808, offset=b0a21500 bytes remaining 2592
ETH Init: Ch:1 - 600 rx BDs at 0xb0a21500
dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
eth3: MAC Address: 20:76:00:52:F1:E0
eth2: MAC Address: 20:76:00:52:F1:E0
eth1: MAC Address: 20:76:00:52:F1:E0
eth0: MAC Address: 20:76:00:52:F1:E0
eth4: MAC Address: 20:76:00:52:F1:E0
eth5: MAC Address: 20:76:00:52:F1:E0
Broadcom BCM3168C0 USB Network Device v0.4a May 23 2012 20:28:28
usb0: MAC Address: 20 76 00 52 F1 E2
usb0: Host MAC Address: 20 76 00 52 F1 E3
hub 1-0:1.0: over-current change on port 2
USBD Initialization done status 0
USB Link DOWN.
--SMP support
wl: dsl_tx_pkt_flush_len=338
wl: high_wmark_tot=3121
PCI: Setting latency timer of device 0000:00:00.0 to 64
wl: passivemode=1
wl: napimode=0
wl0: allocskbmode=1 currallocskbsz=512
otp_read_pci: bad crc
Neither SPROM nor OTP has valid image
wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
wl:loading /etc/wlan/bcm6362_vars.bin
Failed to open srom image from '/etc/wlan/bcm6362_vars.bin'.
wl:loading /etc/wlan/bcm6362_map.bin
wl0: Broadcom BCM435f 802.11 Wireless Controller 5.100.138.2001.cpeCAC001-31.30L8.3
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Endpoint: endpoint_init entry
Endpoint: endpoint_init board id C1000B
Endpoint: endpoint_init board id C1000B is not C2000A, exit.
insmod: cannot insert `/lib/modules/2.6.30/extra/endpointdd.ko': Success (1): Success
p8021ag: p8021ag_init entry
=====CENTURYLINK Release Version CAC001-31.30L.8/CAH001-31.30L.8 (build timestamp 120523_2125) =====
smd:error:16.527:initDls:274:Get Board ID C1000A
rm: cannot remove `/var/dbus/messagebus.pid': No such file or directory
ssk:error:24.324:lck_checkBeforeEntry:171:lock required during cmsObj_getNextInSubTreeFlags
ssk:error:24.326:rutVoice_getMaxPhysEndpt:386:error during ioctl
ssk:error:24.326:rutVoice_getNumFxoEndpt:463:error during ioctl
ssk:error:24.327:rutVoice_getNumFxsEndpt:424:error during ioctl
ssk:error:24.327:rutVoice_getNumFxoEndpt:463:error during ioctl
###Tag1 signature(Actiontec),version(CAC001-31.30L.8),version2(CAH001-31.30L.8),imageSequence(528)
###Tag2 signature(Actiontec),version(CAC001-31.30L.8),version2(CAH001-31.30L.8),imageSequence(529)
ssk:error:31.439:AEI_rut_getDefaultAdminPassword:221:Yuki:admin password from nvram=5Ud9iz7p
ssk:error:31.440:AEI_rut_getDefaultAdminPassword:243:Yuki:defaultAdminPassword:: 5Ud9iz7p
cat: /var/fyi/sys/dnsv6: No such file or directory
Host MIPS Clock divider pwrsaving is enabled
DDR Self Refresh pwrsaving is enabled
AEI_rut_getTimeZoneName index:3
ssk:error:31.662:rutSntp_restart:132:sntp start para=-s time.nist.gov -s ntp1.tummy.com -f 86400 -t Mountain Time
sntp:error:31.951:main:820:[sntp.c:820]UpdateFrequency=86400
ssk:error:32.767:rcl_udpEchoDiagObject:483:tr143: rcl_udpEchoDiagObject
ssk:error:32.767:rcl_udpEchoDiagObject:512:tr143: newObj->enable=0
no exist file [/var/autoreservation] error num [2],reason [No such file or directory]
create file [/var/autoreservation] error num [2],reason [No such file or directory]
ssk:error:32.833:rutLan_updateDhcpd:2271:Exit with ret=0
Wlmnger>> main(91): WLmngr Daemon is running
Wlmnger>> main(101): optarg=0 shmId=0
killall: wlevt: no process killed
wlevt is ready for new msg...
ssk:error:38.038:rcl_lanAlgObject:27:switch SIP ALG to state 1
insmod nf_conntrack_sip and nf_nat_sip
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
ssk:error:38.717:rutLan_updateDhcpd:2271:Exit with ret=0
ssk:error:38.735:rutLan_updateDhcpd:2271:Exit with ret=0
ssk:error:38.753:rutLan_updateDhcpd:2271:Exit with ret=0
BcmAdsl_Initialize=0xC01D4B28, g_pFnNotifyCallback=0xC020FF74
lmemhdr[2]=0x100CE000, pAdslLMem[2]=0x100CE000
pSdramPHY=0xA3FFFFF8, 0x0 0x0
*** XfaceOffset: 0x5FF90 => 0x5FF90 ***
*** PhySdramSize got adjusted: 0xD19E0 => 0x1080A0 ***
AdslCoreSharedMemInit: shareMemAvailable=171840
AdslCoreHwReset: pLocSbSta=81568000 bkupThreshold=3072
AdslCoreHwReset: AdslOemDataAddr = 0xA3F9304C
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
fapDrv_psmAlloc: fapIdx=1, size: 1600, offset=b0a227d0 bytes remaining 992
XTM Init: Ch:0 - 200 rx BDs at 0xb0a227d0
fapDrv_psmAlloc: fapIdx=1, size: 128, offset=b0a22e10 bytes remaining 864
XTM Init: Ch:1 - 16 rx BDs at 0xb0a22e10
rcl_wanPppConnObject@885 ====>>>>>>>>>pppconnection ifName ppp0.1 is default wan=1
rut_sendInterfaceNameToRTD@1532 ====>>>>>>>>>ifName = ppp0.1
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: Bad rule (does a matching rule exist in that chain?)
httpd:error:39.707:initLoggingFromConfig:96:failed to get lock, ret=9809
ssk:error:39.717:rutEth_setSwitchWanPort:181:ioctl SIOCSWANPORT ewan0 returns error!
SIOCGIFFLAGS: No such device
Netfilter messages via NETLINK v0.30.
iptables: No chain/target/match by that name
captiveEnable=0,webActiveLogEnable=0,webSiteBlockEnable=0
/var/url_list is not existed.
set NETLINK_RECV_NO_ENOBUFS
ssk:error:40.348:rcl_detectWANServiceObject:235:starting detectWANService, pid=866
ssk:error:40.352:rcl_wanOpt60Object:349:++++++++newObj->WANOption60=CTL
ssk:error:40.432:ssk_init:1032:dbus-daemon is ready now.
httpd:error:41.772:AEI_cmsDal_getLanHpna:205:Failed to get object MDMOID_LAN_HPNA_INTF, ret=9804
smd:error:42.713:initDls:274:Get Board ID C1000A
status=00
< SES_LED_OFF >
DEBUG bcm/rtd_bcm.c:163 msg initialization eid=16
DEBUG bcm/rtd_bcm.c:181 cmsMdm_init successful, shmId=0
DEBUG bcm/rtd_bcm.c:238 rtd init succ.
Note: Loading 6300 MDK (default) driver for 63168 chip
Note: Forcing 53115 driver for 53125
Switch MDK: num_switches = 2
Switch MDK: unit = 0; phy_pbmp = 0x18; config_pbmp = 0x58
PMD: Module entry!
Switch MDK link poll thread: unit=0; phypbmp=0x18
AutoNeg is disableth4 (switch port: 11) Link UP -1 mbps half duplex
ed and Speed has changed
Switch MDK link poll thread: unit=1; phypbmp=0xf
AutoNeg is disableth5 (switch port: 12) Link UP -1 mbps half duplex
ed and Speed has changed
dbusrecv_msg.c: service(ctl.pmd) entering main loop!
PMD: message_type=4, sender=org.freedesktop.DBus, destination=:1.2, interface=org.freedesktop.DBus, method=NameAcquired
dbusrecv_getmsg: get msg failed!
PMD: couldn't get any msg!
PMD: message_type=4, sender=org.freedesktop.DBus, destination=:1.2, interface=org.freedesktop.DBus, method=NameAcquired
dbusrecv_getmsg: get msg failed!
PMD: couldn't get any msg!
Setting SSID: "CenturyLink0831"
Setting SSID: "CenturyLink0832"
Setting SSID: "CenturyLink0833"
Setting SSID: "CenturyLink0834"
Setting SSID: "wl0_Guest4"
chanspec 0x 0 selected
ifconfig: br1: error fetching interface information: Device not found
ifconfig: br2: error fetching interface information: Device not found
ifconfig: br3: error fetching interface information: Device not found
< SES_LED_OFF >
<WPS_STOP>
< SES_LED_OFF >
<WPS_SUCCESS>
< WSC_EVENTS_PROC_SUCC >
>>>>> WPS PushButton Status Change <<<<<
fffc0
ledctrlmode=wlan control
fffc0
ledctrlmode=wlan control
fffc0
ledctrlmode=wlan control
fffc0
ledctrlmode=wlan control
fffc0
ledctrlmode=wlan control
DEBUG rtd.c:477 rtd init OK!,Bein send msg to ipv4.
DEBUG bcm/rtd_bcm.c:686 send msg: 1,
DEBUG bcm/rtd_bcm.c:702 Success to send msg to Ipv4!
DEBUG rtd.c:567 ====netlinkProcess begin===
DEBUG rtd.c:557 netlink create success:9
DEBUG rtd.c:577 dad_fd=9
dbusrecv_msg.c: service(ctl.rtd) entering main loop!
DEBUG rtd.c:136 callback_func message_type=4, sender=org.freedesktop.DBus, destination=:1.1, interface=org.freedesktop.DBus, method=NameAcquired
dbusrecv_getmsg: get msg failed!
ERROR rtd.c:155 fail to recv msg from msg bus!
DEBUG rtd.c:136 callback_func message_type=4, sender=org.freedesktop.DBus, destination=:1.1, interface=org.freedesktop.DBus, method=NameAcquired
dbusrecv_getmsg: get msg failed!
ERROR rtd.c:155 fail to recv msg from msg bus!
data_center cfg()
DEBUG rtd.c:136 callback_func message_type=1, sender=:1.3, destination=ctl.rtd, interface=ctl.msgCTL_MSG_ACCESS_CFG_METHODCALL, method=RESTORE
DEBUG accesscfg.c:276 ===>:enter cfg_restore()
DEBUG bcm/cfg_bcm.c:98 ==>cfg_read_data,primary=1
ERROR accesscfg.c:309 base64 decode fail!
rm: cannot remove `/tmp/cfg.xml.gz': No such file or directory
NOTICE accesscfg.c:142 restore default cfg.xml!
DEBUG accesscfg.c:147 cmd_line=(tr69_cfg /etc/protype_q2000.xml /etc/cfg_q2000.xml /tmp/cfg.xml /tmp/cfg.xml)
===protype_f=/etc/protype_q2000.xml,cfg_f=/etc/cfg_q2000.xml,pre_cfg_file=/tmp/cfg.xml,new_cfg_file=/tmp/cfg.xml====
==tr69 cfg done==
DEBUG accesscfg.c:151 cmd_line=(tr69_cfg /etc/protype.xml /etc/cfg.xml /tmp/cfg.xml /tmp/cfg.xml)
===protype_f=/etc/protype.xml,cfg_f=/etc/cfg.xml,pre_cfg_file=/tmp/cfg.xml,new_cfg_file=/tmp/cfg.xml====
tr69_intf_mod_instance 1335 InternetGatewayDevice.QueueManagement.Classification
begin to set_leaf_data InternetGatewayDevice.QueueManagement.ClassificationNumberOfEntries
end to set_leaf_data InternetGatewayDevice.QueueManagement.ClassificationNumberOfEntries
add instance 2
tr69_intf_mod_instance 1335 InternetGatewayDevice.QueueManagement.Classification
begin to set_leaf_data InternetGatewayDevice.QueueManagement.ClassificationNumberOfEntries
end to set_leaf_data InternetGatewayDevice.QueueManagement.ClassificationNumberOfEntries
add instance 3
==tr69 cfg done==
DEBUG accesscfg.c:386 ========end restore==========
Successfully to send msg!
DEBUG tr69_func_igd.c:234 FUNCTION LINE InternetGatewayDevice.DeviceInfo tr69_func_set_DeviceInfo_value 234
DEBUG tr69_func_vendor_cfg.c:55 FUNCTION LINE InternetGatewayDevice.DeviceInfo.VendorConfigFile.1 tr69_func_set_VendorConfigFile_value 55
DEBUG tr69_func_dev_cfg.c:55 FUNCTION LINE InternetGatewayDevice.DeviceConfig tr69_func_set_DeviceConfig_value 55
DEBUG tr69_func_mngr.c:56 FUNCTION LINE InternetGatewayDevice.ManagementServer tr69_func_set_ManagementServer_value 56
DEBUG tr69_func_mngr.c:59 NEW FUNCTION LINE tr69_func_set_ManagementServer_value 59
DEBUG tr69_func_time.c:55 FUNCTION LINE InternetGatewayDevice.Time tr69_func_set_Time_value 55
DEBUG tr69_func_ping.c:55 FUNCTION LINE InternetGatewayDevice.IPPingDiagnostics tr69_func_set_IPPingDiagnostics_value 55
DEBUG tr69_func_lan.c:55 FUNCTION LINE InternetGatewayDevice.LANDevice.1 tr69_func_set_LANDevice_value 55
DEBUG tr69_func_lan_host_cfg.c:55 FUNCTION LINE InternetGatewayDevice.LANDevice.1.LANHostConfigManagement tr69_func_set_LANHostConfigManagement_value 55
DEBUG tr69_func_lan_host_iptf.c:232 ipv6 lan enable 0, 0
DEBUG tr69_func_ipv6_lan_host_cfg.c:77 in set IPv6LANHostConfigManagement
DEBUG tr69_func_ipv6_lan_host_cfg.c:79 new ojb, newObj->IPv6DNSConfigType=DHCP,newObj->Enable=0
DEBUG tr69_func_ipv6_lan_host_cfg.c:183 new ojb, newObj->IPv6DNSConfigType=DHCP,newObj->Enable=0
DEBUG tr69_func_ipv6_lan_host_mld.c:55 FUNCTION LINE InternetGatewayDevice.LANDevice.1.X_BROADCOM_COM_IPv6LANHostConfigManagement.X_BROADCOM_COM_MldSnoopingConfig tr69_func_set_X_BROADCOM_COM_MldSnoopingConfig_value 55
DEBUG tr69_func_lan_eth_cfg.c:62 FUNCTION LINE InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1 tr69_func_set_LANEthernetInterfaceConfig_value 62
DEBUG tr69_func_lan_eth_cfg.c:67 NEW FUNCTION LINE tr69_func_set_LANEthernetInterfaceConfig_value 67
DEBUG tr69_func_lan_eth_stat.c:55 FUNCTION LINE InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1.Stats.1 tr69_func_set_Stats_value 55
DEBUG tr69_func_lan_hosts.c:55 FUNCTION LINE InternetGatewayDevice.LANDevice.1.Hosts tr69_func_set_Hosts_value 55
DEBUG tr69_func_lan_hosts.c:109 FUNCTION LINE InternetGatewayDevice.LANDevice.1.Hosts.Host.1 tr69_func_set_Host_value 109
DEBUG tr69_func_wan.c:55 FUNCTION LINE InternetGatewayDevice.WANDevice.1 tr69_func_set_WANDevice_value 55
DEBUG tr69_func_wan_itf.c:57 FUNCTION LINE InternetGatewayDevice.WANDevice.1.WANCommonInterfaceConfig tr69_func_set_WANCommonInterfaceConfig_value 57
DEBUG tr69_func_wan_conn_dev.c:55 FUNCTION LINE InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1 tr69_func_set_WANConnectionDevice_value 55
DEBUG tr69_func_wan_conn_ip.c:128 get phy wan type
DEBUG tr69_rut_wan.c:254 Successfully to send msg! PHYconnupdate
DEBUG tr69_rut_wan.c:291 Successfully to send msg! dad update
DEBUG tr69_func_wan_conn_ip_pmap.c:58 FUNCTION LINE InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1.PortMapping.1 tr69_func_set_PortMapping_value 58
DEBUG tr69_func_wan_conn_ip_pmap.c:61 NEW FUNCTION LINE tr69_func_set_PortMapping_value 61
DEBUG rtd.c:136 callback_func message_type=4, sender=:1.3, destination=(null), interface=ctl.msgCTL_MSG_WATCH_WAN_PHY_TYPE, method=DefaultMethod
DEBUG rtd.c:239 RTD recv watch wan phy type,phywantype .
DEBUG tr69_func_wan_conn_ppp.c:206 p_new_data->X_BROADCOM_COM_IfName =
DEBUG rtd.c:136 callback_func message_type=4, sender=:1.3, destination=(null), interface=ctl.msgCTL_MSG_WATCH_DAD_RESULT, method=DefaultMethod
DEBUG rtd.c:247 RTD recv watch wan dad result .
DEBUG wandev.c:371 not have dad failed yet
DEBUG tr69_func_wan_conn_ppp_pmap.c:55 FUNCTION LINE InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.PortMapping.1 tr69_func_set_WANPPPConnection_PortMapping_value 55
DEBUG tr69_func_ipv6_lay3_fwd.c:63 FUNCTION LINE InternetGatewayDevice.X_BROADCOM_COM_IPv6Layer3Forwarding tr69_func_set_X_BROADCOM_COM_IPv6Layer3Forwarding_value 63
DEBUG tr69_func_ipv6_lay3_fwd.c:77 start up condition
DEBUG tr69_func_ipv6_lay3_fwd_fwd.c:55 FUNCTION LINE InternetGatewayDevice.X_BROADCOM_COM_IPv6Layer3Forwarding.IPv6Forwarding.1 tr69_func_set_IPv6Forwarding_value 55
DEBUG tr69_func_aei_firewall.c:65 FUNCTION LINE InternetGatewayDevice.X_AEI_COM_Firewall tr69_func_set_X_AEI_COM_Firewall_value 65
DEBUG tr69_rut_route.c:33 Enter
WARNING tr69_rut_route.c:96 Both PPPConn and IPConn are Disable!
DEBUG tr69_rut_route.c:172 Exit. ret=-10, gwIfName=
DEBUG tr69_func_aei_firewall_rules.c:56 FUNCTION LINE InternetGatewayDevice.X_AEI_COM_Firewall.X_AEI_COM_Firewall_Rules.1 tr69_func_set_X_AEI_COM_Firewall_Rules_value 56
DEBUG tr69_func_queuemanagement.c:63 FUNCTION LINE InternetGatewayDevice.QueueManagement tr69_func_set_QueueManagement_value 63
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.1 tr69_func_set_Classification_value 60
DEBUG tr69_rut_qos.c:78 ###p=1,ret=1
DEBUG tr69_rut_qos.c:190 instance_id=1,flowId=0X20800
NOTICE tr69_rut_util.c:313 rutQos_executeIp6tblsCommand -- ip6tables -t mangle -D POSTROUTING -j MARK --set-mark 0x20806 -m dscp --dscp 0x2e >/dev/null
ip6tables v1.4.0: can't initialize ip6tables table `mangle': iptables who? (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
NOTICE tr69_rut_util.c:313 rutQos_executeIp6tblsCommand -- ip6tables -t mangle -D POSTROUTING -j ACCEPT -m dscp --dscp 0x2e >/dev/null
ip6tables v1.4.0: can't initialize ip6tables table `mangle': iptables who? (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.1 tr69_func_set_Classification_value 60
DEBUG tr69_rut_iptables.c:746 insmod IPv6 modules
DEBUG tr69_rut_iptables.c:304 moduleName=xt_tcpudp
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:185 xt_tcpudp is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_TCPMSS
DEBUG tr69_rut_iptables.c:156 xt_TCPMSS is not in.
DEBUG tr69_rut_iptables.c:156 xt_TCPMSS is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/netfilter/xt_TCPMSS.ko
DEBUG tr69_rut_iptables.c:304 moduleName=xt_SKIPLOG
DEBUG tr69_rut_iptables.c:156 xt_SKIPLOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink
DEBUG tr69_rut_iptables.c:156 nfnetlink is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_state
DEBUG tr69_rut_iptables.c:156 xt_state is not in.
DEBUG tr69_rut_iptables.c:156 xt_state is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:156 nf_conntrack is in.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/netfilter/xt_state.ko
DEBUG tr69_rut_iptables.c:304 moduleName=xt_limit
DEBUG tr69_rut_iptables.c:156 xt_limit is not in.
DEBUG tr69_rut_iptables.c:156 xt_limit is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/netfilter/xt_limit.ko
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink_queue
DEBUG tr69_rut_iptables.c:156 nfnetlink_queue is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_filter
DEBUG tr69_rut_iptables.c:156 ip6table_filter is not in.
DEBUG tr69_rut_iptables.c:156 ip6table_filter is not in.
DEBUG tr69_rut_iptables.c:156 ip6_tables is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/ipv6/netfilter/ip6_tables.ko
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/ipv6/netfilter/ip6table_filter.ko
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- ip6tables -t filter -F
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_mangle
DEBUG tr69_rut_iptables.c:156 ip6table_mangle is not in.
DEBUG tr69_rut_iptables.c:156 ip6table_mangle is not in.
DEBUG tr69_rut_iptables.c:156 ip6_tables is in.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/ipv6/netfilter/ip6table_mangle.ko
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- ip6tables -t mangle -F
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_LOG
DEBUG tr69_rut_iptables.c:156 ip6t_LOG is not in.
DEBUG tr69_rut_iptables.c:156 ip6t_LOG is not in.
DEBUG tr69_rut_iptables.c:156 ip6table_filter is in.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/ipv6/netfilter/ip6t_LOG.ko
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_REJECT
DEBUG tr69_rut_iptables.c:156 ip6t_REJECT is not in.
DEBUG tr69_rut_iptables.c:156 ip6t_REJECT is not in.
DEBUG tr69_rut_iptables.c:156 ip6table_filter is in.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
DEBUG tr69_rut_iptables.c:304 moduleName=nf_conntrack_ipv6
DEBUG tr69_rut_iptables.c:156 nf_conntrack_ipv6 is not in.
DEBUG tr69_rut_iptables.c:156 nf_conntrack_ipv6 is not in.
DEBUG tr69_rut_iptables.c:156 nf_conntrack is in.
NOTICE tr69_rut_util.c:313 insertModuleByIndex -- insmod /lib/modules/2.6.30/kernel/net/ipv6/netfilter/nf_conntrack_ipv6.ko
DEBUG tr69_rut_iptables.c:771 done
DEBUG tr69_rut_wan6.c:2014 Enter ctl_rut_isWan6InterfaceUp
ERROR tr69_rut_wan6.c:2059 NOT found wan connection!
DEBUG tr69_rut_wan6.c:2091 WAN6 Interface is down
ERROR tr69_rut_qos.c:147 Add qos rule, but Interface is not UP!
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.2 tr69_func_set_Classification_value 60
DEBUG tr69_rut_qos.c:78 ###p=2,ret=2
DEBUG tr69_rut_qos.c:190 instance_id=2,flowId=0X21000
NOTICE tr69_rut_util.c:313 rutQos_executeIp6tblsCommand -- ip6tables -t mangle -D POSTROUTING -j MARK --set-mark 0x21006 -m dscp --dscp 0x16 >/dev/null
ip6tables: No chain/target/match by that name
NOTICE tr69_rut_util.c:313 rutQos_executeIp6tblsCommand -- ip6tables -t mangle -D POSTROUTING -j ACCEPT -m dscp --dscp 0x16 >/dev/null
ip6tables: Bad rule (does a matching rule exist in that chain?)
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.2 tr69_func_set_Classification_value 60
DEBUG tr69_rut_iptables.c:746 insmod IPv6 modules
DEBUG tr69_rut_iptables.c:304 moduleName=xt_tcpudp
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:185 xt_tcpudp is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_TCPMSS
DEBUG tr69_rut_iptables.c:156 xt_TCPMSS is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_SKIPLOG
DEBUG tr69_rut_iptables.c:156 xt_SKIPLOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink
DEBUG tr69_rut_iptables.c:156 nfnetlink is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_state
DEBUG tr69_rut_iptables.c:156 xt_state is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_limit
DEBUG tr69_rut_iptables.c:156 xt_limit is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink_queue
DEBUG tr69_rut_iptables.c:156 nfnetlink_queue is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_filter
DEBUG tr69_rut_iptables.c:156 ip6table_filter is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_mangle
DEBUG tr69_rut_iptables.c:156 ip6table_mangle is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_LOG
DEBUG tr69_rut_iptables.c:156 ip6t_LOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_REJECT
DEBUG tr69_rut_iptables.c:156 ip6t_REJECT is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nf_conntrack_ipv6
DEBUG tr69_rut_iptables.c:156 nf_conntrack_ipv6 is in.
DEBUG tr69_rut_iptables.c:771 done
DEBUG tr69_rut_wan6.c:2014 Enter ctl_rut_isWan6InterfaceUp
ERROR tr69_rut_wan6.c:2059 NOT found wan connection!
DEBUG tr69_rut_wan6.c:2091 WAN6 Interface is down
ERROR tr69_rut_qos.c:147 Add qos rule, but Interface is not UP!
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.3 tr69_func_set_Classification_value 60
DEBUG tr69_rut_qos.c:78 ###p=3,ret=3
DEBUG tr69_rut_qos.c:190 instance_id=3,flowId=0X21800
NOTICE tr69_rut_util.c:313 rutQos_executeIp6tblsCommand -- ip6tables -t mangle -D POSTROUTING -j MARK --set-mark 0x21806 -m dscp --dscp 0x1a >/dev/null
ip6tables: No chain/target/match by that name
NOTICE tr69_rut_util.c:313 rutQos_executeIp6tblsCommand -- ip6tables -t mangle -D POSTROUTING -j ACCEPT -m dscp --dscp 0x1a >/dev/null
ip6tables: Bad rule (does a matching rule exist in that chain?)
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.3 tr69_func_set_Classification_value 60
DEBUG tr69_rut_iptables.c:746 insmod IPv6 modules
DEBUG tr69_rut_iptables.c:304 moduleName=xt_tcpudp
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:185 xt_tcpudp is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_TCPMSS
DEBUG tr69_rut_iptables.c:156 xt_TCPMSS is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_SKIPLOG
DEBUG tr69_rut_iptables.c:156 xt_SKIPLOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink
DEBUG tr69_rut_iptables.c:156 nfnetlink is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_state
DEBUG tr69_rut_iptables.c:156 xt_state is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_limit
DEBUG tr69_rut_iptables.c:156 xt_limit is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink_queue
DEBUG tr69_rut_iptables.c:156 nfnetlink_queue is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_filter
DEBUG tr69_rut_iptables.c:156 ip6table_filter is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_mangle
DEBUG tr69_rut_iptables.c:156 ip6table_mangle is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_LOG
DEBUG tr69_rut_iptables.c:156 ip6t_LOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_REJECT
DEBUG tr69_rut_iptables.c:156 ip6t_REJECT is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nf_conntrack_ipv6
DEBUG tr69_rut_iptables.c:156 nf_conntrack_ipv6 is in.
DEBUG tr69_rut_iptables.c:771 done
DEBUG tr69_rut_wan6.c:2014 Enter ctl_rut_isWan6InterfaceUp
ERROR tr69_rut_wan6.c:2059 NOT found wan connection!
DEBUG tr69_rut_wan6.c:2091 WAN6 Interface is down
ERROR tr69_rut_qos.c:147 Add qos rule, but Interface is not UP!
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.1 tr69_func_set_Classification_value 60
DEBUG tr69_rut_iptables.c:746 insmod IPv6 modules
DEBUG tr69_rut_iptables.c:304 moduleName=xt_tcpudp
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:185 xt_tcpudp is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_TCPMSS
DEBUG tr69_rut_iptables.c:156 xt_TCPMSS is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_SKIPLOG
DEBUG tr69_rut_iptables.c:156 xt_SKIPLOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink
DEBUG tr69_rut_iptables.c:156 nfnetlink is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_state
DEBUG tr69_rut_iptables.c:156 xt_state is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_limit
DEBUG tr69_rut_iptables.c:156 xt_limit is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink_queue
DEBUG tr69_rut_iptables.c:156 nfnetlink_queue is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_filter
DEBUG tr69_rut_iptables.c:156 ip6table_filter is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_mangle
DEBUG tr69_rut_iptables.c:156 ip6table_mangle is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_LOG
DEBUG tr69_rut_iptables.c:156 ip6t_LOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_REJECT
DEBUG tr69_rut_iptables.c:156 ip6t_REJECT is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nf_conntrack_ipv6
DEBUG tr69_rut_iptables.c:156 nf_conntrack_ipv6 is in.
DEBUG tr69_rut_iptables.c:771 done
DEBUG tr69_rut_wan6.c:2014 Enter ctl_rut_isWan6InterfaceUp
ERROR tr69_rut_wan6.c:2059 NOT found wan connection!
DEBUG tr69_rut_wan6.c:2091 WAN6 Interface is down
ERROR tr69_rut_qos.c:147 Add qos rule, but Interface is not UP!
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.2 tr69_func_set_Classification_value 60
DEBUG tr69_rut_iptables.c:746 insmod IPv6 modules
DEBUG tr69_rut_iptables.c:304 moduleName=xt_tcpudp
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:185 xt_tcpudp is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_TCPMSS
DEBUG tr69_rut_iptables.c:156 xt_TCPMSS is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_SKIPLOG
DEBUG tr69_rut_iptables.c:156 xt_SKIPLOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink
DEBUG tr69_rut_iptables.c:156 nfnetlink is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_state
DEBUG tr69_rut_iptables.c:156 xt_state is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_limit
DEBUG tr69_rut_iptables.c:156 xt_limit is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink_queue
DEBUG tr69_rut_iptables.c:156 nfnetlink_queue is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_filter
DEBUG tr69_rut_iptables.c:156 ip6table_filter is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_mangle
DEBUG tr69_rut_iptables.c:156 ip6table_mangle is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_LOG
DEBUG tr69_rut_iptables.c:156 ip6t_LOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_REJECT
DEBUG tr69_rut_iptables.c:156 ip6t_REJECT is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nf_conntrack_ipv6
DEBUG tr69_rut_iptables.c:156 nf_conntrack_ipv6 is in.
DEBUG tr69_rut_iptables.c:771 done
DEBUG tr69_rut_wan6.c:2014 Enter ctl_rut_isWan6InterfaceUp
ERROR tr69_rut_wan6.c:2059 NOT found wan connection!
DEBUG tr69_rut_wan6.c:2091 WAN6 Interface is down
ERROR tr69_rut_qos.c:147 Add qos rule, but Interface is not UP!
DEBUG tr69_func_queuemanagement_classification.c:60 FUNCTION LINE InternetGatewayDevice.QueueManagement.Classification.3 tr69_func_set_Classification_value 60
DEBUG tr69_rut_iptables.c:746 insmod IPv6 modules
DEBUG tr69_rut_iptables.c:304 moduleName=xt_tcpudp
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 xt_tcpudp is not in.
DEBUG tr69_rut_iptables.c:156 x_tables is not in.
DEBUG tr69_rut_iptables.c:185 x_tables is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:185 xt_tcpudp is static and does not need to be inserted.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_TCPMSS
DEBUG tr69_rut_iptables.c:156 xt_TCPMSS is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_SKIPLOG
DEBUG tr69_rut_iptables.c:156 xt_SKIPLOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink
DEBUG tr69_rut_iptables.c:156 nfnetlink is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_state
DEBUG tr69_rut_iptables.c:156 xt_state is in.
DEBUG tr69_rut_iptables.c:304 moduleName=xt_limit
DEBUG tr69_rut_iptables.c:156 xt_limit is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nfnetlink_queue
DEBUG tr69_rut_iptables.c:156 nfnetlink_queue is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_filter
DEBUG tr69_rut_iptables.c:156 ip6table_filter is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6table_mangle
DEBUG tr69_rut_iptables.c:156 ip6table_mangle is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_LOG
DEBUG tr69_rut_iptables.c:156 ip6t_LOG is in.
DEBUG tr69_rut_iptables.c:304 moduleName=ip6t_REJECT
DEBUG tr69_rut_iptables.c:156 ip6t_REJECT is in.
DEBUG tr69_rut_iptables.c:304 moduleName=nf_conntrack_ipv6
DEBUG tr69_rut_iptables.c:156 nf_conntrack_ipv6 is in.
DEBUG tr69_rut_iptables.c:771 done
DEBUG tr69_rut_wan6.c:2014 Enter ctl_rut_isWan6InterfaceUp
ERROR tr69_rut_wan6.c:2059 NOT found wan connection!
DEBUG tr69_rut_wan6.c:2091 WAN6 Interface is down
ERROR tr69_rut_qos.c:147 Add qos rule, but Interface is not UP!
DEBUG tr69_func_LogLevel.c:57 p_cur_data == NULL && p_new_data != NULL
DEBUG tr69_func_LogLevel.c:62 p_new_data->X_AEI_COM_ModuleName=data_center,p_new_data->Enable=1,p_new_data->X_AEI_COM_LogLevel=2
DEBUG tr69_func_LogLevel.c:57 p_cur_data == NULL && p_new_data != NULL
DEBUG tr69_func_LogLevel.c:62 p_new_data->X_AEI_COM_ModuleName=rtd,p_new_data->Enable=1,p_new_data->X_AEI_COM_LogLevel=2
DEBUG tr69_func_aei_nud.c:74 =======NUD:p_new_data->Enable=0,p_new_data->PayloadLength=0,p_new_data->Result=Pending,p_new_data->RTT=========
DEBUG tr69_func_aei_nud.c:77 NUD: enter here when data model init
|
cat /proc/cpuinfo
> cat /proc/cpuinfo system type : C1000B processor : 0 cpu model : Broadcom4350 V8.0 BogoMIPS : 398.33 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : no hardware watchpoint : no ASEs implemented : shadow register sets : 1 core : 0 VCED exceptions : not available VCEI exceptions : not available unaligned exceptions : 71 processor : 1 cpu model : Broadcom4350 V8.0 BogoMIPS : 402.43 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : no hardware watchpoint : no ASEs implemented : shadow register sets : 1 core : 0 VCED exceptions : not available VCEI exceptions : not available unaligned exceptions : 71
cat /proc/mtd
> cat /proc/mtd dev: size erasesize name mtd0: 01d78000 00004000 "rootfs" mtd1: 01d78000 00004000 "rootfs_update" mtd2: 00400000 00004000 "data" mtd3: 00004000 00004000 "nvram" mtd4: 00004000 00004000 "tag" mtd5: 00004000 00004000 "tag_update"
cat /proc/cmdline
> cat /proc/cmdline root=mtd:rootfs ro rootfstype=jffs2 console=ttyS0,115200
cat /proc/version
> cat /proc/version Linux version 2.6.30 (wayne@wayne-desktop) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #3 SMP PREEMPT Wed May 23 21:24:30 PDT 2012
cat /proc/bus/pci/devices
> cat /proc/bus/pci/devices 0000 14e4435f f a0000000 0 0 0 0 0 a0010000 10000 0 0 0 0 0 800 wl 0048 14e46300 11 10002600 0 0 0 0 0 0 100 0 0 0 0 0 0 ohci_hcd 0050 14e46300 12 10002500 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd 0100 14e46326 f 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver
cat /proc/modules
> cat /proc/modules nf_conntrack_ipv6 13680 0 - Live 0xc12ad000 ip6t_REJECT 4016 0 - Live 0xc12a0000 ip6t_LOG 7072 0 - Live 0xc1295000 ip6table_mangle 2256 0 - Live 0xc1281000 ip6table_filter 2144 0 - Live 0xc126e000 ip6_tables 13968 3 ip6t_LOG,ip6table_mangle,ip6table_filter, Live 0xc1261000 xt_limit 2240 0 - Live 0xc1254000 xt_state 1760 0 - Live 0xc124a000 xt_TCPMSS 4448 0 - Live 0xc1240000 nfnetlink_queue 9184 1 - Live 0xc11d4000 nfnetlink 4304 2 nfnetlink_queue, Live 0xc11c7000 xt_SKIPLOG 1200 0 - Live 0xc11bd000 iptable_nat 5040 0 - Live 0xc11aa000 nf_nat_sip 5136 0 - Live 0xc1198000 nf_nat 17088 2 iptable_nat,nf_nat_sip, Live 0xc118a000 nf_conntrack_ipv4 13840 3 iptable_nat,nf_nat, Live 0xc1179000 nf_defrag_ipv4 1552 1 nf_conntrack_ipv4, Live 0xc116b000 nf_conntrack_sip 12432 1 nf_nat_sip, Live 0xc115f000 nf_conntrack 63344 7 nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat_sip,nf_nat,nf_conntrack_ipv4,nf_conntrack_sip, Live 0xc1144000 iptable_mangle 2320 1 - Live 0xc0f52000 iptable_filter 2240 1 - Live 0xc0f3f000 ip_tables 12704 3 iptable_nat,iptable_mangle,iptable_filter, Live 0xc0f32000 xt_multiport 2800 0 - Live 0xc0f25000 xt_MARK 1792 6 - Live 0xc0f1b000 xt_mark 1376 0 - Live 0xc0f12000 xt_mac 1264 0 - Live 0xc0f09000 xt_DSCP 3008 0 - Live 0xc0f00000 xt_dscp 2080 0 - Live 0xc0ef6000 pwrmngtd 7088 0 - Live 0xc0eec000 (P) bcmvlan 84240 0 - Live 0xc0ecd000 (P) p8021ag 7008 0 - Live 0xc0ea6000 (P) wl 2748528 0 - Live 0xc05b9000 (P) bcm_usb 28128 0 - Live 0xc0286000 (P) bcm_enet 119280 2 pwrmngtd,wl, Live 0xc0256000 adsldd 349968 0 - Live 0xc01d2000 (P) bcmxtmcfg 70512 1 adsldd, Live 0xc0160000 (P) bcmfap 77728 0 - Live 0xc0114000 (P) pktflow 56192 1 bcmfap, Live 0xc00c5000 (P) bcm_bpm 211440 0 [permanent], Live 0xc007b000 (P) bcm_ingqos 10560 0 - Live 0xc006c000 (P)
wlctl -i wl0 revinfo
> wlctl -i wl0 revinfo vendorid 0x14e4 deviceid 0x435f radiorev 0xc2057000 chipnum 0x6362 chiprev 0x1 chippackage 0x0 corerev 0x16 boardid 0x5e2 boardvendor 0x14e4 boardrev P102 driverrev 0x5648a7d ucoderev 0x2a30002 bus 0x0 phytype 0x4 phyrev 0x8 anarev 0x0
ps aux
> ps aux
PID Uid VmSize Stat Command
1 admin 472 S init
2 admin SW< [kthreadd]
3 admin SW< [migration/0]
4 admin SW [sirq-high/0]
5 admin SW [sirq-timer/0]
6 admin SW [sirq-net-tx/0]
7 admin SW [sirq-net-rx/0]
8 admin SW [sirq-block/0]
9 admin SW [sirq-tasklet/0]
10 admin SW [sirq-sched/0]
11 admin SW [sirq-hrtimer/0]
12 admin SW [sirq-rcu/0]
13 admin SW< [migration/1]
14 admin SW [sirq-high/1]
15 admin SW [sirq-timer/1]
16 admin SW [sirq-net-tx/1]
17 admin SW [sirq-net-rx/1]
18 admin SW [sirq-block/1]
19 admin SW [sirq-tasklet/1]
20 admin SW [sirq-sched/1]
21 admin SW [sirq-hrtimer/1]
22 admin SW [sirq-rcu/1]
23 admin SW< [events/0]
24 admin SW< [events/1]
25 admin SW< [khelper]
28 admin SW< [async/mgr]
75 admin SW< [kblockd/0]
76 admin SW< [kblockd/1]
85 admin SW< [khubd]
102 admin SW< [bpm]
118 admin SW [pdflush]
119 admin SW [pdflush]
120 admin SWN [kswapd0]
122 admin SW< [crypto/0]
123 admin SW< [crypto/1]
181 admin SW< [mtdblockd]
231 admin SWN [jffs2_gcd_mtd2]
233 admin 532 S -sh
261 admin SW [kpAliveWatchdog]
272 admin SW [dsl0]
293 admin SW [bcmsw]
294 admin SW [bcmsw_timer]
295 admin SW< [linkwatch]
336 admin 1276 S smd
337 admin 3008 S ssk
352 500 1088 S /bin/dbus-daemon --system
369 admin 492 S syslogd -n -C -l 7
370 admin 416 S klogd -n
376 admin 472 S dnsproxy
377 admin 448 S sntp -s time.nist.gov -s ntp1.tummy.com -f 86400 -t M
425 admin 500 S dhcpd
439 admin 1104 S mcpd
736 admin 2284 S wlmngr -m 0
764 admin 124 S /bin/wlevt
863 admin 428 S urlfilterd Exclude
866 admin 940 S detectWANService -d 0 -n 6 -c 3 -i 5 -m 4
944 admin 1736 S tr64c
946 admin 332 S dsldiagd
948 admin 1324 S swmdk
949 admin 960 S mynetwork
951 admin 1628 S rtd -m 0
991 admin 864 S ./pmd
997 admin 1324 S swmdk
999 admin 1324 S swmdk
1000 admin 1324 S swmdk
1104 admin 344 S /bin/lld2d br0
1108 admin 200 S /bin/eapd
1112 admin 508 S /bin/nas
1114 admin 820 S /bin/wps_monitor
1219 admin 2120 S ./data_center
1220 admin 1628 S rtd -m 0
1221 admin 1628 S rtd -m 0
1291 admin 1448 S consoled
1372 admin SW< [scsi_eh_1]
1373 admin SW< [usb-storage]
1402 admin 460 S sh -c ps aux
1403 admin 452 R ps aux
Categories:
- Actiontec
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded system/analog phone gateway
- Embedded System Broadcom
- Embedded System BCM63168
- Broadcom
- Embedded System BMIPS4350
- Embedded System
- Embedded System BCM53125
- Manuf Actiontec
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
