Actiontec GT704WGRV
From TechInfoDepot
Jump to navigationJump to search
| bg (G54) | |
|---|---|
| Wireless DSL Gateway with Voice | |
| WikiDevi.wi-cat.ru | Actiontec GT704WGRV |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Actiontec GT704WGRV |
| FCC ID | LNQGT704WGRV |
| Type | wireless router, dsl modem, analog phone gateway |
| CPU1 | Texas Instruments Model? |
| Flash1 Chip | AMD Model? |
| Flash1 Size | ? MiB |
| RAM1 Size | ? MiB |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Texas Instruments Model? |
| Switch | Marvell Model? |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types | none specified |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
|
| |
|
| |
| Other | |
|
Default IP address: 192.168.0.1 | |
| Retail | |
| Availability | unreleased? |
| FCC approval date | 10 October 2005 |
| Radio 1 | |
| Chip1 | Texas Instruments Model? |
| Chip2 | Texas Instruments Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | RP-SMA |
| Wireless Standard | IEEE 802.11b/g |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
For a list of all currently documented Actiontec devices with specifications, see Actiontec.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
The default IP is per the FCC manual.
Categories:
- Actiontec
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded system/analog phone gateway
- Embedded System Texas Instruments
- Embedded System
- Texas Instruments
- Embedded System Marvell
- Marvell
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation