Airlink101 AR430W
bg (G108) | |
---|---|
Super G™ Wireless Router | |
Homepage | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Airlink101 AR430W |
FCC ID | |
IC ID | |
Type |
wireless router |
CPU1 | |
CPU1 Type |
MIPS 4KEc |
CPU1 Speed |
180 MHz 32-bit |
Flash1 Chip |
Winbond 25X32VFIG |
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
ESMT M12L128168A-7T |
ETH chip1 | |
Switch |
IC+ IP175E |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock bootloader |
RedBoot v2.3 |
Stock FW OS |
Linux 2.4.25 LSDK-5.0.0-RC5 |
Expansion IF types |
none |
Power |
5 VDC, 2 A |
Connector type |
barrel 5.5 mm (OD) 2 mm (ID) 10 mm (LEN) |
Serial Port (UART) |
yes, internal, unpopulated, 3.3V TTL, 4-pin header, (9600 8N1) |
JTAG Port |
14-pin header |
Additional chips | |
Other | |
Default SSID: default (101 addl. devices) | |
Manuf/OEM/ODM |
Alpha Networks WRG-G19 |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 16 February 2007 |
UPC |
658729080300 (UPC DB, On eBay) |
ASIN | B000RV602E |
Country of manuf | China |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
00:18:02,00:1D:6A |
Antenna Connector Type |
RP-SMA |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 108 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Airlink101 device with specifications, see Airlink101.
- • 108 Mbps - 2.4GHz 802.11g = G108 class
Overview
OEM Alpha Networks WRG-G19 (8WRGG19..1C1G)
The D-Link DIR-300 rev A1 and Airlink101 AR335W are also WRG-G19s.
According to the manual, the default SSID is default.
The power adapter included with the device is a JENTEC AF1205-B (5V, 2.0A). ID/OD/Len measurements are approximate.
Links of Interest
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v24 rc5
- clone dir-300
- install like dir-300
- On the DD-WRT Forum
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt Wiki
On the OpenWrt Forum
Support started version: 12.09
Current supported version: 18.06.0
Please insert instructions here
- Airlink101
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR2318
- Atheros
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System IC+
- Embedded System IP175E
- IC+
- Manuf Alpha Networks
- DD-WRT Supported
- OpenWrt Supported
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation