Aliyun AP8220

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX3600)
Wireless LAN Access Point
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Aliyun AP8220
FCC ID 2AVUGAP8220
Type access point
CPU1 checkY Qualcomm IPQ8071A
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.4 GHz ( 4 cores )
Flash1 Chip Brand? Model?
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
Flash2 Size 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />
RAM1 Chip Brand? Model?
ETH chip1 Qualcomm IPQ8071A
Switch Qualcomm IPQ8071A
Ethernet Port Count 2-2.5GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 2.0
USB ports 2
USB Hub Compatible Untested
PoE 802.3at, standard
Power 12 VDC, 2 A
Connector type barrel
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)

Flags:
Wi-Fi 6

Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 28 August 2020
Radio 1
Chip1 Qualcomm QCN5024
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 1148 Mbps
802.11n up to 600 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm QCN5054
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 2402 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.

• 1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan.),
• 2402 Mbps - 4SS 5GHz 802.11ax (80MHz chan.) = AX3600 class

Flashing

Flashing OpenWrt

Target: qualcommax
Subtarget: ipq807x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.1
WLAN Hardware: Qualcomm QCN5024, Qualcomm QCN5054
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >> 
ipq807x: add Edgecore EAP102
The Edgecore EAP102 is a wall/ceiling mountable AP. The AP can be
powered by either PoE or AC adapter.

Device info:
 - IPQ8071-A SoC
 - 1GiB RAM
 - 256MiB NAND flash
 - 32MiB SPI NOR
 - 2 Ethernet ports
 - 1 Console port
 - 2GHz/5GHz AX WLAN
 - 2 USB 2.0 ports

Install instructions:

Prerequistes - TFTP server, preferrably within 192.168.1.0/24
	       Console cable plugged in (115200 8N1 no flow control)

1. Power on device and interrupt u-boot to obtain u-boot CLI

2. set serverip to IP address of the TFTP server:

	`setenv serverip 192.168.1.250`

3. Download image from TFTP server:

	`tftpboot 0x44000000 openwrt-ipq807x-generic-edgecore_eap102-squashfs-nand-factory.ubi`

4. Flash ubi image to both partitions and reset:

	`sf probe
	 imxtract 0x44000000 ubi
	 nand device 0
	 nand erase 0x0 0x3400000
	 nand erase 0x3c00000 0x3400000
	 nand write $fileaddr 0x0 $filesize
	 nand write $fileaddr 0x3c00000 $filesize
	 reset`

See also

Alibaba Cloud Commputing Co.,Ltd.
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Aliyun_AP8220&oldid=530714"