Amped Wireless B1200EX
abgn+ac (AC1200) | |
|---|---|
| AC1200 Plug-In Wi-Fi Range Extender | |
 | |
| Homepage | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Amped Wireless B1200EX |
| FCC ID | |
| IC ID | |
| Type |
range extender |
| CPU1 | |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
580 MHz 32-bit |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Winbond W9751G6KB-25 |
| ETH chip1 | |
| ETH chip2 |
Realtek Model? |
| Ethernet Port Count |
1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
100-240 VAC ~ 50/60 Hz, 0.16 A |
| Connector type |
AC (direct) |
| Other | |
|
Default SSID: Amped_B1200EX_2.4 | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 17 May 2017 |
| ASIN |
B072PPX2HM  |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
MediaTek MT7612EN |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n/ac |
| 802.11ac |
up to 867 Mbps |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Amped Wireless device with specifications, see Amped Wireless.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 23.05.0
Current supported version: 23.05.5
Please insert instructions here
- Amped Wireless
- Embedded system/range extender
- Embedded System MediaTek
- Embedded System MT7620A
- MediaTek
- Embedded System MIPS 24KEc
- Embedded System
- Embedded System Realtek
- Realtek
- Manuf Edimax
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MT7612EN
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
