Arris BGW210-700

abgn+ac (AC22002R)
AT&T Arris BGW210-700 802.11b/g/n/ac 400mW Bonded VDSL2 Wireless Voice Gateway 4 x Gigabit Ports
WikiDevi.wi-cat.ru	Arris BGW210-700
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Arris BGW210-700
FCC ID	PGRBGW210
Type	Fiber CPE, wireless router, dsl modem, VoIP phone
CPU1	Broadcom BCM63148
CPU1 Type	ARM Cortex-A9 (v7)
CPU1 Speed	1.0 GHz ( 2 cores )
CPU2	Quantenna QT3840BC
CPU2 Type	ARC 700
CPU2 Speed	500 MHz ( 2 cores )
Flash1 Chip	Spansion Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Broadcom BCM63148
Switch	Broadcom BCM63148
Ethernet Port Count	4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	USB 3.0
USB ports	2
USB Hub Compatible	Untested
Flags: DFS (master)
Other
Default IP address: 192.168.1.254 the IP 192.168.1.254 is used by 157 additional devices of which 2 are Arris devices
Retail
FCC approval date	01 December 2016
ASIN	B07BZC72TB
Radio 1
Chip1	Quantenna Model?
Chip2	Quantenna QT2518B
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	4x4:4
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 1733 Mbps
802.11n	up to 600 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	Broadcom Model?
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.

For a list of all currently documented Arris device with specifications, see Arris.

• 1733 Mbps - 4SS 5GHz 802.11ac (80MHz chan.),

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AC2200 class

Overview

"ARRIS", "BGW210", and "HW1.3A" is silkscreened on the board.

• DFS Test Report

"20MHZ operation is not supported in the DFS bands"

Notes

Bridge mode

1. Login to the BGW210-700's web-based configuration interface in your web browser using the link: https://192.168.1.254

2. Go to the "Home Network" tab -> "Wi-Fi" tab

3. Set Home SSID Enable to "Off"

4. Set Guest SSID Enable to "Off"

5. Set 2.4 GHz Wi-Fi operation to "Off"

6. Set 5 GHz Wi-Fi operation to "Off"

7. Go to the "Firewall" -> "Packet Filter" tab. Click on the "Disable Packet Filters" button.

8. Go to the "Firewall" -> "IP Passthrough" tab. Select "Passthrough" in the "Allocation Mode" option

9. Do not enter anything for the "Default Server Internal Address". Leave this field blank

10. In the "Passthrough Mode" selection choose "DHCPS-Fixed".

11. Type in the routers MAC address for your router under "Manual Entry". The MAC address should be in traditional hexadecimal format xx:xx:xx:xx:xx:xx where x's should be values from 0-9 or letters a-f, separated by colons.

12. The Passgthrough DHCP Lease value defaults to 10 minutes. You cannot change this.

13. Click "Save" at the bottom. Go back and check to make sure that the changes were implemented. If not, do it again.

14. Click on the "Device" tab and select "Restart Device". It will take a couple of minutes.