Askey RTW026-D31

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
b (B11)
wireless router
WikiDevi.wi-cat.ru Askey RTW026-D31
3rd Party Firmware
dd-wrt Incompatible
OpenWrt Incompatible
Tomato any flavor Incompatible
Platform
BrandModelRev Askey RTW026-D31
FCC ID H8N-RTW026D31
Type wireless router
CPU1 checkY Conexant CX84200
CPU1 Type ARM7
CPU1 Speed 75 MHz
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Conexant CX84200
Switch Conexant CX84200
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:90:96 (2 E, 10 W)
Ethernet OUI: 00:90:96 (2 E, 10 W)

Expansion IF types PCMCIA (16-bit)
PCMCIA slots 1
Power 12 VDC, 1 A
Connector type barrel
Other

Default SSID: IEEE 802.11 LAN (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1335 additional devices
of which 4 are Askey devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 283 additional devices
of which 1 are Askey devices

Retail
FCC approval date 11 March 2003
Radio 1
Radio1 module Askey WLC033
Radio1 module IF PCMCIA (16-bit)
Chip1 Atmel AT76C502A
Chip2 RFMD Model?
Wireless interface OUI 00:90:96
Antenna Connector Type MMCX, RP-SMA
Wireless Standard IEEE 802.11b
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Askey RTW026ConexantAtmelRFMD
Askey RTW026-D31ConexantAtmelRFMD

For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.

For a list of all currently documented Askey devices with specifications, see Askey.

11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"3028-000201" and "R1.1" is silkscreened on the board in the FCC photos.

FCC photos show the device with a Siemens branded shell.

Probable 00:90:96 OUI (on MAC label on back of the board in the FCC photos)

The FCC manual specifies the default SSID as IEEE 802.11 LAN, default IP as 192.168.1.1, and default password as admin. This is presumed to be accurate..