Atmel ATNGW100
From TechInfoDepot
Jump to navigationJump to search
single-board computer | |
3rd Party Firmware | |
---|---|
dd-wrt | Status Unknown |
OpenWrt | Was Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Atmel ATNGW100 |
Type | single-board computer |
CPU1 ![]() | Atmel AT32AP7000 |
CPU1 Speed | 210 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Chip | Brand? Model? |
ETH chip1 | Atmel AT32AP7000 |
Switch | Atmel AT32AP7000 |
Ethernet Port Count | 2-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
| |
Stock bootloader | U-Boot |
Expansion IF types | USB 2.0 |
USB ports | 1 |
USB Hub Compatible | Untested |
Power | 9-15 VDC, ? A |
Serial Port (UART) | yes |
JTAG Port | yes |
| |
| |
Other | |
| |
3rd Party Firmware Support |
OpenWrt (Was) |
Retail | |
Availability | End of Life |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Atmel devices with specifications, see Atmel.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: avr32
OpenWrt Subtarget: generic
OpenWrt Package architecture: other
Support started version: 8.09
Current supported version: EOL
Last Supported Version: 8.09
Comment:
RISC32 processor core
On the OpenWrt Wiki
OpenWrt Target: avr32
OpenWrt Subtarget: generic
OpenWrt Package architecture: other
Support started version: 8.09
Current supported version: EOL
Last Supported Version: 8.09
Comment:
RISC32 processor core
Please insert instructions here