AudioCodes Mediapack MP-252
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| wireless router, dsl modem, CPE | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | AudioCodes Mediapack MP-252 |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | wireless router, dsl modem, CPE |
| CPU1 | Lantiq PSB 50702 |
| CPU1 Type | MIPS 24Kec |
| CPU1 Speed | 333 MHz ( 2 cores ) |
| Flash1 Chip | Macronix MX29GL256EL |
| Flash1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Lantiq PSB 50702 |
| Switch | Infineon ADM6996I |
| DSL Ports | 1 |
| RJ11 Ports (VOIP/POTS) | 2 |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Connector type | barrel |
| Serial Port (UART) | yes |
| JTAG Port | yes |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 | Ralink RT3062F |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
POTS Silicon Laboratories Si3220 + Si3208 2x FXS
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
OpenWrt Target: lantiq
OpenWrt Subtarget: xway
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: 24.10.4
OpenWrt Subtarget: xway
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: 24.10.4
LAN Hardware: Infineon ADM6996I
LAN Comment: 4x Eth
WLAN Hardware: Ralink RT3062F
LAN Comment: 4x Eth
WLAN Hardware: Ralink RT3062F
Please insert instructions here
Categories:
- AudioCodes
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded system/CPE
- Embedded System Lantiq
- Embedded System PSB 50702
- Lantiq
- Embedded System MIPS 24Kec
- Embedded System
- Embedded System Infineon
- Embedded System ADM6996I
- Infineon
- OpenWrt Supported
- Embedded System Ralink
- Embedded System RT3062F
- Ralink
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation