Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.

B-LINK BL-AP03 (KY669A)

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
access point
WikiDevi.wi-cat.ru B-LINK BL-AP03 (KY669A)
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev B-LINK AP03 (KY669A)
FCC ID none specified
Type access point
CPU1 Brand? Model?
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Supereal SR3211UB
Ethernet Port Count 1-10MbE-LAN
Wired Standard IEEE 802.3i

802dot11 OUI: 00:E0:4C (11 E, 21 W)
Ethernet OUI: 00:E0:4C (11 E, 21 W)

Expansion IF types none specified
Power 5 VDC, 0.5 A
Connector type USB Female Mini-B
Flags:
portable
Other

Default SSID: KY669A-XXXXXXXXX
Default IP address: 192.168.1.225
the IP 192.168.1.225 is used by 1 additional devices
of which 0 are B-LINK devices
Default login user: blank
Default login password: 111111111111

Radio 1
Radio1 module B-LINK AP03 Wireless Module
Radio1 module IF USB (non-standard connector)
Chip1 Ralink RT2070
Wireless interface OUI 00:E0:4C
Antenna Connector Type none specified
Wireless Standard IEEE 802.11b/g
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Supereal not currently documented.

For a list of all currently documented B-LINK devices with specifications, see B-LINK.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The only significant chip on board is the Supereal SR3211UB (101301AF).

The manufacturer of this device appears to be B-LINK.

The unit is near identical to this pocket AP (Syba I/O Crest SY-ADA24007, on DX) minus the RT2571W based module.

The device has two modes - AP mode and USB passthrough mode (where it acts as a plain old RT2070 based [ID 148f:2070] USB adapter).

On DealExtreme?

Configuration

111111111111 (13 1s) is the default WEP and HTTP administration key. The HTTP administration (single) page is accessible from the wireless side only with the WEP/admin key required to change unit settings.

The ability to change settings is extremely limited...

  • the SSID will always have the KY669A prefix
  • the channel can be set to 3, 6, 9, or 11 only
  • the WEP/admin key can be changed
  • the device IP can be changed

Pictures

User Images