Belkin F5D7234-4 v4

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
G Wireless Router
Belkin F5D7234-4.jpg
Support
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Belkin F5D7234-4 v4
FCC ID
IC ID
Type
wireless router
Series
F5D7234-4
CPU1
CPU1 Type
MIPS 4KEc
CPU1 Speed
180 MHz
Flash1 Chip
Eon F16-100HIP
Flash1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip
ISSI IC42S16400F-7TL
ETH chip1
Switch
Atheros AR8216
Ethernet Port Count
1-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:1C:DF (16 E, 32 W), 00:22:75 (13 E, 21 W)
Ethernet OUI: 00:1C:DF (16 E, 32 W), 00:22:75 (13 E, 21 W)

Expansion IF types
none specified
Power
9 VDC, 1 A
Connector type
barrel
Other

Default SSID: Belkin_G_Wireless_ (1 addl. devices)
, Belkin_G_Wireless_XXXXXX (2 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 297 additional devices
of which 99 are Belkin devices

Manuf/OEM/ODM
Retail
FCC approval date 25 March 2009
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
00:1C:DF,00:22:75
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Belkin F5D7234-4 v1BroadcomBroadcom
Belkin F5D7234-4 v3AtherosAtheros
Belkin F5D7234-4 v4AtherosAtheros
Belkin F5D7234-4 v5BroadcomBroadcom

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Belkin device with specifications, see Belkin.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"141400520027J REV:0A" is silkscreened on the board.

The default SSID is (maybe, unknown status fresh from the factory) Belkin_G_Wireless_XXXXXX where XXXXXX is the last 3 octets of the WLAN MAC address (w/ uppercase letters). When reset via the reset button, the device will take the SSID of Belkin_G_Wireless_ with no trailing characters. Resetting by way of the web configuration interface resets the SSID to the three octets included format.