Belkin F5D7235-4
From TechInfoDepot
Jump to navigationJump to searchbg (G125) | |
|---|---|
| High-Speed Mode Wireless G Router with Gigabit Switch | |
 | |
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Incompatible |
| Tomato any flavor |
Incompatible |
| Platform | |
| Brand • Model • Rev |
Belkin F5D7235-4 |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| CPU1 | |
| CPU1 Type |
MIPS BMIPS3300 |
| CPU1 Speed |
200 MHz |
| Flash1 Chip |
Spansion S29GL032A |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip |
ESMT Model? x 2 |
| ETH chip1 | |
| Switch |
Broadcom B5011A1KQM |
| Ethernet Port Count |
1-WAN 4-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
5 VDC, 2 A |
| Connector type |
barrel |
| Other | |
|
| |
| Manuf/OEM/ODM |
Askey RT2005G-D56 |
| Retail | |
| FCC approval date | 01 February 2005 |
| Radio 1 | |
| Chip1 | |
| Chip2 |
Broadcom BCM2050 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 125 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio cor_rev |
7 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Belkin device with specifications, see Belkin.
- • 125 Mbps - 2.4GHz 802.11g = G125 class
Links of Interest
JTAG-Serial Info
Serial
| dd-wrt boot log |
|---|
CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0 CPU type 0x29007: 200MHz Total memory: 0x1000000 bytes (16MB) Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312) Initialized Data: 0x8032EFB0 - 0x803312E0 (9008) BSS Area: 0x803312E0 - 0x80332EA0 (7104) Local Heap: 0x80332EA0 - 0x80432EA0 (1048576) Stack Area: 0x80432EA0 - 0x80434EA0 (8192) Text (code) segment: 0x80300000 - 0x8032EFB0 (192432) Boot area (physical): 0x00435000 - 0x00475000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0 gateway not set, nameserver not set Reading :: Done. 3284992 bytes read [flash1.trx] : Programming...done. 3284992 bytes written boardcase upgrade status to client: upgrade success Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 3920 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 |
| Tomato boot log |
|---|
CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0 CPU type 0x29007: 200MHz Total memory: 0x1000000 bytes (16MB) Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312) Initialized Data: 0x8032EFB0 - 0x803312E0 (9008) BSS Area: 0x803312E0 - 0x80332EA0 (7104) Local Heap: 0x80332EA0 - 0x80432EA0 (1048576) Stack Area: 0x80432EA0 - 0x80434EA0 (8192) Text (code) segment: 0x80300000 - 0x8032EFB0 (192432) Boot area (physical): 0x00435000 - 0x00475000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0 gateway not set, nameserver not set I/O error Reading :: Done. 3706880 bytes read [flash1.trx] : Programming...Failed.: Unknown error boardcase upgrade status to client: upgrade failure Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ...... 1646592 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029007 Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 4kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@tomato) (gcc version 3.2.3 with Broadcom modification s) #3 Tue Mar 3 23:35:36 EST 2009 Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4712 rev 1 at 200 MHz Calibrating delay loop... 199.47 BogoMIPS Memory: 14380k/16384k available (1414k kernel code, 2004k reserved, 108k data, 6 4k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Initializing host PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.0 (2006/03/15) Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096 N_HDLC line discipline registered. PPP generic driver version 2.4.2 Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 Flash device: 0x400000 at 0x1c000000 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00020000 : "pmon" 0x00020000-0x003f0000 : "linux" 0x000b94bc-0x001f0000 : "rootfs" 0x001f0000-0x003f0000 : "jffs2" 0x003f0000-0x00400000 : "nvram" sflash: found no supported devices NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (16384 buckets, 8192 max) - 368 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Kernel panic: VFS: Unable to mount root fs on 1f:02 |
| US firmware good boot log |
|---|
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29007: 200MHz
Total memory: 0x1000000 bytes (16MB)
Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312)
Initialized Data: 0x8032EFB0 - 0x803312E0 (9008)
BSS Area: 0x803312E0 - 0x80332EA0 (7104)
Local Heap: 0x80332EA0 - 0x80432EA0 (1048576)
Stack Area: 0x80432EA0 - 0x80434EA0 (8192)
Text (code) segment: 0x80300000 - 0x8032EFB0 (192432)
Boot area (physical): 0x00435000 - 0x00475000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ..... 1474560 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029007
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (lchen@penguin.askey.com) (gcc version 3.2.3 with Broadcom
modifications) #16 Mon Sep 13 17:29:59 PDT 2004
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14536k/16384k available (1245k kernel code, 1848k reserved, 108k data, 6
4k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
PPP generic driver version 2.4.2
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
Flash device: 0x400000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 869
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x003c0000 : "linux"
0x000d94bc-0x003c0000 : "rootfs"
0x003c0000-0x003e0000 : "profile"
0x003e0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Using /lib/modules/2.4.20/kernel/drivers/net/led/led.o
Hit enter to continue...Set name-type for VLAN subsystem. Should be visible in /
proc/net/vlan/config
Added VLAN with VID == 0 to IF -:eth0:-
Added VLAN with VID == 1 to IF -:eth0:-
WARNING: VLAN 1 does not work with many switches,
consider another number if you have problems.
killall: iappd: no process killed
iappd: No such file or directory
info, Moreton Bay DHCP Server (v0.9.5) started
===wan_ifname=vlan1, ifname=vlan1
killall: upnp: no process killed
info, Moreton Bay DHCP Client (v0.9.5) started
No interface specified. Quitting...
No interface specified. Quitting...
Hit enter to continue...debug, Sending select for 192.168.1.139...
info, Lease of 192.168.1.139 obtained, lease time 86400
row_size(): Can't open /tmp/log_web
exlog(): Loged message(WAN DHCP Client Connected IP 192.168.1.139) into /tmp/log
_web.lck directly
start_wan_done(): start_firewall
br0: No such process
vlan1: No such process
none pppoe
killall: dnsmasq: no process killed
send_decoy: pathnag=te.cgi
re_website=HTTP/1.1 200 OK
<html>
<script>
newwindow=window.open("http://filter.belkin.com/setup.asp?SN=BEL21PVT&RP=21483&I
P=192.168.1.139&FV=0.00.07","NAGreminder","toolbar=yes,location=yes,directories=
no,status=no,menubar=no,scrollbars=yes,width=795,height=600,resizable=0");
newwindow.focus();
location="http://192.168.1.1/update.cgi";
</script>
</html>
Hit enter to continue...led_mon(): System is ready(1), WAN is ready(1), quit!
Hit enter to continue...killall: ntpclient: no process killed
BusyBox v0.60.0 (2004.09.14-00:09+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
#
#
|
| NVRAM values |
|---|
CFE> dnvram show pptp_netmask= wl0_frameburst=on m_wan_ipaddr= log_tftp_server= pptp_ipaddr= default_lan_dhcp_client_br=0 *hw_model=F5D7235-4 %serial_no=BEL21PVT *user_conf_ver=1.01 ip_filter=0 pppoe_keepalive=1 ceb_timeout=10 default_lan_netmask_br=255.255.255.0 mac_filter=0 restore_defaults=0 bpa_state= *boardflags=0x0318 default_policy=0 wan_lease=864000 fw_reset=0 http_wanport=80 lan_gateway=192.168.2.1 wl0_ifname=eth2 timer_interval=3600 pptp_username= pppoe_mtu=1454 ceb_nag=1 fwi= udp_filter=0 wan_gateway=0.0.0.0 wl0_mode=ap dhcp_start=192.168.2.2 *os_version=0.00.07 fw_id= default_lan_ipaddr_br=192.168.2.254 dhcp_end=192.168.2.100 user_time_hr=0 wl0_gmode=6 dhcp_lease=0 login_timeout=10 fwt= NatFlag=1 fwu= *et0phyaddr=30 stats_server= static_route= lan_netmask=255.255.255.0 wl0_ssid=belkin54g wl0_dtim=3 http_username= user_time_yr=1970 fwi_des= http_lanport=80 remote_config_ip= wan_ping=1 wan_hwname=et1 wan_domain= ceb_email_enable=1 wan_netmask=0.0.0.0 wl0_key1=F wl0_key2= wl0_key3= wl0_key4= firewall_enable=1 pptp_conn_id= fw_auto_detect=0 log_tftp=0 http_wan_enable=0 http_passwd= bpa_passwd= wl0_closed=0 wl0_rate=0 wl0_macmode=disabled wl0_phytype=g wl0_lazywds=0 pppoe_auth_mode=auto *et1phyaddr=0 wan_dns= *iappd_oid=00:30:bd m_wan_moreip= pppoe_idletime_min=5 wl0_wpa_psk= *fw_src=http://networking.belkin.com/update/files/usa/giga/54g_router.html os_server= wan_proto=dhcp wl0_unit=0 *lan_stp=0 *wl0_country_code=US pppoe_autodns=1 ntp_enable=1 *kernel_mods=et wl bpa_username= wl0_wds= m_wan_hostname= filter_enable=1 log_level=0 dhcp_dns= ntp_server=192.43.244.18 m_wan_gateway= *fw_magic=0x02063200 pptp_idle_disconnect= lan_dns= pppoe_ifname=eth1 wl0_auth=0 wl0_radius_port=1812 wl0_radius_ipaddr= wl0_psk_obscure= pa0maxpwr=60 *device_type=1 wan_ifnames= dos_enable=1 m_wan_domain=Belkin m_lan_netmask=255.255.255.0 m_wan_wins= os_name=linux lan_proto=dhcp lan_ipaddr=192.168.2.1 default_lan_proto_nat=dhcp wl0_phytypes=g wl0_wep=off wl0_frag=2346 m_wan_aliasip= pppoe_passwd= %il0macaddr=00:11:50:9D:A2:6C m_wan_netmask= sdram_config=0x0000 wl0_wep_mode=0 dmz_ipaddr= %et0macaddr=00:11:50:9D:A2:6B wl0_wep64_manual=1 ntp_dst_enabled=1 wl0_rateset=default pppoe_servicename= user_time_dd=1 pppoe_idletime=300 lan_ifname=br0 m_wan_dns= sdram_refresh=0x8040 lan_dhcp_client=0 sdram_ncdl=0x00000000 default_lan_gateway=192.168.2.1 fg= ntp_timezone=5 fi= fj= pptp_idle_interval= wan_ipaddr=0.0.0.0 fm= wl0_rts=2347 default_lan_ipaddr=192.168.2.1 wan_wins= ft= ceb_unavail_block=1 default_lan_dhcp_client_nat=0 wl0_ibss=1 fu= pppoe_username= ntp_sync_interval=1 pptp_password= wl0_wpa_gtk_rekey=900 pppoe_dns= wl0_key=1 user_time_mn=0 user_time_mo=1 console_loglevel=1 time_zone=PST8PDT bpa_server= bpa_manual_enable= default_lan_netmask=255.255.255.0 %et1macaddr=00:11:50:9D:A2:6B wan_ifname=eth1 *belkin_router=1 *language=English wan_hostname= wl0_radio=1 wl0_wep128_manual=1 pptp_server_ipaddr= user_time_update=0 wl0_bcn=100 wl0_hwaddr= BridgeFlag=0 wl0_gmode_protection=auto *lan_ifnames=eth0 eth2 wl0_maclist= sdram_init=0x0419 lan_hwnames=et0 il0 wl0 wl1 pppoe_demand=0 m_lan_ipaddr=192.168.2.1 wl0_radius_key= tcp_filter=0 wl0_channel=11 pppoe_mru=1454 upnp_enable=0 m_autodns=1 default_lan_proto_br=static wl0_auth_mode=disabled internal_policy=1 route_check_host=heartbeat.belkin.com dhcp_autodns=1 size: 3345 bytes (4847 left) *** command status = 0 |
Categories:
- Belkin
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4712
- Broadcom
- Embedded System MIPS
- Embedded System BMIPS3300
- Embedded System B5011A1KQM
- Manuf Askey
- Embedded System BCM2050
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation
