Belkin F9K1115 v2
| abgn+ac (AC1750) | |||||
|---|---|---|---|---|---|
| AC1750 DB Wi-Fi Dual-Band AC+ Gigabit Router | |||||
|
| |||||
| Wikipedia | Belkin | ||||
| WikiDevi.wi-cat.ru | Belkin F9K1115 v2 | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Supported | ||||
| Tomato any flavor | Incompatible | ||||
| Gargoyle | Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev | Belkin F9K1115 v2 | ||||
| FCC ID | K7SF9K1115V2 | ||||
| IC ID | 3623A-F9K1115V2 | ||||
| Type | wireless router | ||||
| CPU1 | Qualcomm Atheros QCA9558 | ||||
| CPU1 Type | MIPS 74Kc | ||||
| CPU1 Speed | 720 MHz | ||||
| Flash1 Chip | Macronix Model? | ||||
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||
| RAM1 Chip | Winbond W9751G6KB-25 | ||||
| ETH chip1 | Qualcomm Atheros QCA9558 | ||||
| Switch | Qualcomm Atheros QCA8337 | ||||
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||
|
802dot11 OUI: none specified | |||||
| Stock bootloader | U-Boot | ||||
| Expansion IF types | USB 3.0, Mini PCIe (oversized) | ||||
| Mini PCIe slots | 1 | ||||
| USB ports | 2 | ||||
| USB Hub Compatible | Untested | ||||
| Power | 12 VDC, 2.5 A | ||||
| Connector type | barrel | ||||
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||
|
| |||||
|
Additional chips | |||||
| Other | |||||
|
Default IP address: 192.168.2.1 | |||||
| Manuf/OEM/ODM | Edimax | ||||
| 3rd Party Firmware Support |
LEDE Project (obsolete, OpenWrt) • (List) , OpenWrt • (List | Dev | DLs) | ||||
| Retail | |||||
| Availability | End of Life | ||||
| End of Life date | 2016 | ||||
| FCC approval date | 02 August 2013 | ||||
| UPC |
722868925539 (UPC DB, On eBay) | ||||
| ASIN |
B004U6NS5Y | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 | Qualcomm Atheros QCA9558 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 3x3:3 | ||||
| Wireless Standard | IEEE 802.11b/g/n | ||||
| 802.11n | up to 450 Mbps | ||||
| 802.11g | up to 54 Mbps | ||||
| 802.11b | up to 11 Mbps | ||||
| WiFi Operating Frequency | 2.4 GHz | ||||
| Radio 2 | |||||
| Radio2 module | Edimax EW-7933MAC V1.0A | ||||
| Radio2 module IF | Mini PCIe (oversized) | ||||
| Chip1 | Qualcomm Atheros QCA9880-2R4E | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 3x3:3 | ||||
| Wireless Standard | IEEE 802.11a/n/ac | ||||
| 802.11ac | up to 1300 Mbps | ||||
| 802.11n | up to 450 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Belkin devices with specifications, see Belkin.
Overview
There does not appear to be a v1 version of this model. Hooray.
The F9K1119v1 AC1600 shares the same FCC ID as this model, which the FCC Application lists as AC1750 DB Wi-Fi Dual-Band AC + Gigabit Router, AC1600 DB Wi-Fi Dual-Band AC + Gigabit Router
Per the FCC photos...
- The WiSoC used is a QCA9558-AT4A.
- The QCA9880 (QCA9880-2R4E / QCA9880v2 [???]) wireless module appears to be using three Skyworks SE5003L1 / 5003L1 5 GHz Power Amplifier modules.
- "EW-7933MAC V1.0A" and "P/C:C71-011" is silkscreened on the back of the wireless module, implying that the module is an Edimax EW-7933MAC.
- There is also a manuf. P/N of some sort on the board.. but it is not readable in the provided photos. I will, however, presume (erroneously?) that Edimax is indeed manufacturing this device (EW-7933AC ??)...
- An EtronTech EJ168A USB 3.0 controller is on-board.. providing the device with two USB 3.0 ports.
- The GbE Switch is a QCA8337-AL3C.
Per additional FCC docs...
- The device is using Airgain PCB antennas.
- 1x N2420S-T10-B100S2 (3.4 dBi gain @ 2.4 GHz)
- 1x N2420S-T10-W50S2 (3.9 dBi gain @ 2.4 GHz)
- 1x N2420S-T10-G190S2 (4.4 dBi gain @ 2.4 GHz)
- 1x N5x20B-T1-B150U (5.8 dBi gain @ 5 GHz)
- 1x N5x20B-T-G65U (5.3 dBi gain @ 5 GHz)
- 1x N5x20B-T-W85U (5.3 dBi gain @ 5 GHz)
- A Macronix Serial Flash is on the back of the board.
The default SSID patterns are belkin.{last three LAN MAC hex digits} and the 5 GHz radio could be suffixed with .5GHz or .media
The power adapter shown in the FCC external photos is a (Belkin branded) DVE DSA-30PFB-12 FUS 120250 (100-240VAC ~ 50/60 Hz, 0.8A -> 12VDC, 2.5A).
- Wi-Fi Certified : WFA19590 (as of 08/05/2013)
Links of Interest
- Manual (may not last at this URL or at this time, currently up as of 08/03/2013
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: 24.10.3
WLAN Comment: Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880-2R4E (mini-PCIe), 3x3
Please insert instructions here
- Belkin
- Embedded system/wireless router
- Embedded System Qualcomm Atheros
- Embedded System QCA9558
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System QCA8337
- Manuf Edimax
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9880-2R4E
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Wi-Fi Certified
- English Documentation