Buffalo WAPS-APG600H

abgn (AN600)
Dual Band Gigabit PoE Wireless Access Point
Homepage	Product page
Wikipedia	Buffalo Inc.
WikiDevi.wi-cat.ru	Buffalo WAPS-APG600H
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Buffalo WAPS-APG600H
FCC ID	FDI000000004, FDI04604022-0
Type	access point
CPU1	Ralink RT3662
CPU1 Type	MIPS 74Kc
CPU1 Speed	500 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	Winbond W9751G6KB-25 x 2
ETH chip1	Ralink RT3662
ETH chip2	Realtek RTL8211E
ETH chip3	Realtek RTL8211E
Ethernet Port Count	2-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	USB 2.0
USB ports	2
USB Hub Compatible	Untested
PoE	802.3af, standard
Power	12 VDC, 0.6 A
Connector type	barrel
Serial Port (UART)	RJ-45
Other
Default SSID: BUFFALO-XXXXXX_A (1 addl. devices) , BUFFALO-XXXXXX_G (1 addl. devices) Default login user: admin Default login password: password admin:password credentials used by 425 additional devices of which 14 are Buffalo devices
Manuf/OEM/ODM	Edimax
Retail
FCC approval date	13 September 2012
UPC	163120655113 (UPC DB, On eBay)
ASIN	B00B7N580G
Country of manuf	China
Radio 1
Chip1	Ralink RT3662
Wireless interface OUI	none specified
Antenna Connector Type	U.FL, RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	Ralink RT3092
Wireless interface OUI	none specified
Antenna Connector Type	U.FL, RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Buffalo device with specifications, see Buffalo.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

This FCC ID appears to be used for both the WAPS-APG600H (Dual-band concurrent) and the WAPS-AG300H (Dual-band selectable).

"1244-00000854-50Z" is silkscreened on the board in the FCC photos.

Per the FCC manual, the default SSID patterns are presumed to be BUFFALO-XXXXXX_A and BUFFALO-XXXXXX_G (XXXXXX being the last three octets of some MAC used by the unit, upper case hex digits) . The devices are also presumed to use a 10:6F:3F (Buffalo) OUI.