Buffalo WLI-TX4-AG300N
From TechInfoDepot
Jump to navigationJump to search
| abgn (AN600) | |
|---|---|
| Buffalo AirStation Nfiniti Dual Band Wireless-N Ethernet Converter | |
|
| |
| Homepage | Product page (EN) |
| Wikipedia | Buffalo Inc. |
| InfoDepot Wiki | Buffalo WLI-TX4-AG300N |
| WikiDevi.wi-cat.ru | Buffalo WLI-TX4-AG300N |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Buffalo WLI-TX4-AG300N |
| FCC ID | FDI-09102074-0 |
| Type | bridge |
| CPU1 | Ralink RT2880 |
| CPU1 Type | MIPS 4KEc |
| CPU1 Speed | 266 MHz |
| Flash1 Chip | Macronix MX29LV320EBTI-70G |
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip | EtronTech EM639165TS-6G x 2 |
| ETH chip1 | Ralink RT2880 |
| Switch | IC+ IP175C |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Stock bootloader | U-Boot 1.1.3 |
| Stock FW OS | Linux 2.4.30 |
| Expansion IF types | none specified |
| Power | 12 VDC, 1.5 A |
| Serial Port (UART) | yes, internal, unpopulated, 3.3V TTL, 4-pin header, (57600 8N1) |
| JTAG Port | probably |
|
| |
|
Additional chips | |
| Other | |
|
Default IP address: 1.1.1.1 | |
| Manuf/OEM/ODM | Gemtek WACR-130N |
| 3rd Party Firmware Support |
OpenWrt (Was) |
| Retail | |
| Availability | End of Life |
| End of Life date | 2017 |
| FCC approval date | 19 January 2009 |
| (Est.) release date | 01 April 2009 |
| UPC |
747464118482 (UPC DB, On eBay) |
| Newegg | N82E16833162029 |
| ASIN |
B001QVN2NE |
| Radio 1 | |
| Chip1 | Ralink RT2880 |
| Chip2 | Ralink RT2850 |
| Wireless interface OUI | 00:24:A5 |
| Antenna Connector Type | U.FL |
| MIMO status | 2x3:2 |
| Wireless Standard | IEEE 802.11a/b/g/n |
| 802.11n | up to 300/300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 2.4 or 5 GHz |
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Buffalo devices with specifications, see Buffalo.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
OpenWrt Target: ramips
OpenWrt Subtarget: rt288x
OpenWrt Package architecture: mips_4kec
Support started version: 14.07
Current supported version: EOL
Last Supported Version: 19.07.10
OpenWrt Subtarget: rt288x
OpenWrt Package architecture: mips_4kec
Support started version: 14.07
Current supported version: EOL
Last Supported Version: 19.07.10
Image too big: snapshot
Unsupported Functions:
Switch module missing so no wired access, unable to save configuration changes.
Comment:
Images are currently broken! See https://dev.openwrt.org/ticket/22318; Image build disabled in master with commit d7d46da938e3
Unsupported Functions:
Switch module missing so no wired access, unable to save configuration changes.
Comment:
Images are currently broken! See https://dev.openwrt.org/ticket/22318; Image build disabled in master with commit d7d46da938e3
Please insert instructions here
Pictures
Categories:
- Buffalo
- Embedded system/bridge
- Embedded System Ralink
- Embedded System RT2880
- Ralink
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System IC+
- Embedded System IP175C
- IC+
- Manuf Gemtek
- OpenWrt Was Supported
- Embedded System RT2850
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation