CMCC MR3000D-CI

abgn+ac+ax (AX3000)
AX3000 Wireless Router
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	CMCC MR3000D-CI
FCC ID	none specified
Type	wireless router
CPU1 Y	Qualcomm IPQ5018
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.0 GHz ( 2 cores )
Flash1 Chip	GigaDevice GD5F1GQ5REYIG
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
RAM1 Size	512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3L)
RAM1 Chip	Brand? Model?
ETH chip1	Qualcomm IPQ5018
Switch	Qualcomm Atheros QCA8337
Ethernet Port Count	4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	none specified
Power	12 VDC, 1.5 A
Serial Port (UART)	yes, 3.3V TTL, (115200 8N1)
JTAG Port	no
Flags: Wi-Fi 6
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	Qualcomm IPQ5018
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 574 Mbps
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Qualcomm QCN6102
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac/ax
AX-QAM	up to 2402 Mbps
802.11ax	up to 1201 Mbps
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),

• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: qualcommax
Subtarget: ipq50xx
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot

LAN Hardware: Qualcomm Atheros QCA8337
WLAN Hardware: Qualcomm IPQ5018 + Qualcomm Atheros QCN6102
WLAN Comment: 2x2 MIMO 2.4 & 5 GHz
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Recovery Comment:
use serial console

git • >>

qualcommax: ipq50xx: add support for CMCC MR3000D-CI CMCC MR3000D-CI is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on IPQ5000. Device specification -------------------- - SoC : Qualcomm IPQ5018 - RAM : 512 MiB DDR3L - Flash : 128 MiB SPI-NAND (GigaDevice GD5F1GQ5REYIG) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : Qualcomm IPQ5018 (SoC) - 5 GHz : Qualcomm Atheros QCN6102 - Ethernet : 4x 10/100/1000 Mbps - Switch : Qualcomm Atheros QCA8337 - LEDs/Keys (GPIO) : 2x LEDs, 2x Buttons - UART : Through-hole on PCB - Voltage : 3.3 V - Assignment : Silkscreened on PCB - Settings : 115200n8 - Power : 12 VDC, 1.5 A Installation ----------------- 1. Telnet method a. Enable telnet Log in to http://192.168.10.1/ with the password on the sticker Modify URL according to example (keep your unique hash after ";stok=") and press Enter: http://192.168.10.1/cgi-bin/luci/;stok=78becad1b1490e45be2776025cde2b7d/api/NPCnetwork/ping?url=$(telnetd) You should get the following in the browser: {"link":0} b. Run tftp server on IP 192.168.10.254 and put factory image 'openwrt-qualcommax-ipq50xx-cmcc_mr3000d-ci-squashfs-factory.ubi' in the tftp root dir. c. Login to 192.168.10.1 with telnet (user: root, pass: from the sticker). d. Download factory image from the tftp: tftp -l factory.ubi -r openwrt-qualcommax-ipq50xx-cmcc_mr3000d-ci-squashfs-factory.ubi -g 192.168.10.254 e. Flash factory image: export rootfs=$(cat /proc/mtd | grep rootfs | grep -v _ | cut -d: -f1) ubidetach -f -p /dev/${rootfs} ubiformat /dev/${rootfs} -y -f /tmp/factory.ubi f. Reboot: reboot 2. U-Boot Method using UBI Image (using UART) a. Place the factory.ubi file on your TFTP server, enter U-Boot CLI and exec these commands: tftpboot <your_tftp_server_ip>:factory.ubi flash rootfs reset 3. U-Boot Method using initramfs Image (using UART) a. Place the openwrt-*-initramfs-fit-uImage.itb file on your TFTP server and rename it to initramfs.bin b. Enable serial console, enter to U-Boot CLI and exec these commands: tftpboot <your_tftp_server_ip>:initramfs.bin bootm c. Once boot completed, upload the sysupgrade.bin file to router's /tmp directory (using scp or wget) and execute the following command in openwrt shell: sysupgrade -n /tmp/sysupgrade.bin MAC Addresses ------------- +--------------+-------------------+-------------+ | Interface | MAC example | Location | +--------------+-------------------+-------------+ | LAN | 84:7a:xx:xx:xx:dd | 0:ART, 0x6 | | WAN (label) | 84:7a:xx:xx:xx:dc | 0:ART, 0x0 | | WLAN 2.4 GHz | 84:7a:xx:xx:xx:de | 0:ART, 0xc | | WLAN 5 | 84:7a:xx:xx:xx:df | 0:ART, 0x12 | +--------------+-------------------+-------------+ Notes ----- 1. U-Boot is protected by a password (pass: netpower). Signed-off-by: Mikhail Zhilkin Link: https://github.com/openwrt/openwrt/pull/21952 Signed-off-by: Robert Marko