COMFAST CF-E393AX

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX3000)
3000Mbps WIFI6 Dual Frequency Indoor Wireless AP
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev COMFAST CF-E393AX
FCC ID none specified
Type access point
CPU1 checkY MediaTek MT7981A
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip Brand? Model?
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI-NAND)
RAM1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7981A
ETH chip2 MaxLinear GPY211C
ETH chip3 MediaTek MT7531AE
Ethernet Port Count 1-2.5GbE-WAN
1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
Power 48 VDC, 0.5 A
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Country of manuf China
Radio 1
Chip1 MediaTek MT7981A
Chip2 MediaTek MT7976D
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7981A
Chip2 MediaTek MT7976D
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 3x3:2
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 2402 Mbps
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5.8 GHz

For a list of all currently documented MaxLinear (Intel) chipsets with specifications, see MaxLinear (Intel).
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented COMFAST devices with specifications, see COMFAST.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),
• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.2
Current supported version: 25.12.5
LAN Hardware: MediaTek MT7531AE
LAN Comment: MaxLinear GPY211C 2.5Gbe Phy
WLAN Hardware: MediaTek MT7981A, MediaTek MT7976DA
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
instructions • >> 
Gain SSH access:
1. Login into web interface (http://apipaddress/computer/login.html),
   and download the
   configuration(http://apipaddress/computer/config.html).

2. Rename downloaded backup config - 'backup.file to backup.tar.gz',
   Enter 'fakeroot' command then decompress the configuration:
   tar -zxf backup.tar.gz

3. Edit 'etc/shadow', update (remove) root password:
   With password =
   'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::'
   'root:$1$xf7D0Hfg$5gkjmvgQe4qJbe1fi/VLy1:19362:0:99999:7:::'
   to
   Without password =
   'root::0:99999:7:::'
   'root::0:99999:7:::'

4. Repack 'etc' directory back to a new backup file:
   tar -zcf backup-ssh.tar.gz etc/
5. Rename new config tar.gz file to 'backup-ssh.file'
   Exit fakeroot - 'exit'

6. Upload new configuration via web interface, now you
   can SSH with the following:

   'ssh -vv -o HostKeyAlgorithms=+ssh-rsa \
   -o PubkeyAcceptedAlgorithms=+ssh-rsa root@192.168.10.1'.

   Backup the mtd partitions
   - https://openwrt.org/docs/guide-user/installation/generic.backup

7. Copy openwrt factory firmware to the tmp folder to install via ssh:

   'scp -o HostKeyAlgorithms=+ssh-rsa \
   -o PubkeyAcceptedAlgorithms=+ssh-rsa \
   *-mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin \
   root@192.168.10.1:/tmp/'

   'sysupgrade -n -F \
   /tmp/*--mediatek-filogic-comfast_cf-e393ax-squashfs-factory.bin'

8. Once led has stopped flashing - Connect via ssh with the
   default openwrt ip address - 'ssh root@192.168.1.1'

9. SSH copy the openwrt sysupgrade firmware and upgrade
   as per the default instructions.
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=COMFAST_CF-E393AX&oldid=538526"