Chacon IPCAM-RI01

bgn (N150)
IP camera
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Gargoyle	Incompatible
Platform
Brand • Model • Rev	Chacon IPCAM-RI01
FCC ID	none specified
Type	IP camera
CPU1	HiSilicon HI3518EV300
CPU1 Type	ARM Cortex-A7
CPU1 Speed	900 MHz
Flash1 Chip	XMC XM25QH128A x 1
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR)
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Brand? Model?
802dot11 OUI: none specified
Stock bootloader	U-Boot
Stock FW OS	Linux 4.9.37
Expansion IF types	none specified
SD/MMC Slots	1
Other
3rd Party Firmware Support	OpenIPC
Radio 1
Chip1	Realtek RTL8188FTV
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented HiSilicon SoC's with specifications, see HiSilicon.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

Product datasheet

This camera is a rebranding of a manufacturing company identified by “PPStrong”. I’m sure there are other cameras out there that are using the same hardware (or similar with minor changes).

Hardware details

The camera mainboard is identified by “SPEED5S-H1MB_F23”.

The sensor is a JXF23.

Original firmware

The camera uBoot is password protected with “pps_password”.

Links of interest

https://github.com/OpenIPC/wiki/blob/master/en/device-chacon-ipcam-ri01.md