Cisco EPC3208G
From TechInfoDepot
Jump to navigationJump to search
| EuroDOCSIS 3.0 8x4 Cable Modem | |
|
| |
| Wikipedia | Cisco Systems |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Incompatible |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Cisco EPC3208G |
| Type | cable modem |
| CPU1 | Broadcom BCM3382 |
| CPU1 Speed | 400 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Broadcom BCM3382 |
| Cable Modem Spec | DOCSIS 3.0: (8 x 4) |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Expansion IF types | none specified |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Cisco devices with specifications, see Cisco.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
OpenWrt Target: brcm63xx
OpenWrt Subtarget: unknown
OpenWrt Package architecture: mipsel_mips32
Support started version: Never supported
Current supported version: Never supported
OpenWrt Subtarget: unknown
OpenWrt Package architecture: mipsel_mips32
Support started version: Never supported
Current supported version: Never supported
Unsupported Functions:
Never supported
Never supported
Please insert instructions here