Cisco ON100
From TechInfoDepot
Jump to navigationJump to search
| Network Agent | |
|
| |
| Wikipedia | Cisco Systems |
|---|---|
| WikiDevi.wi-cat.ru | Cisco ON100 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Cisco ON100-K9 V01 |
| Type | network monitor |
| CPU1 | Marvell 88F6282 |
| CPU1 Type | ARMv5 |
| CPU1 Speed | 1.6 GHz 32-bit |
| Flash1 Chip | SK hynix HY27UF084G2B |
| Flash1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | SK hynix H5TQ1G83DFR-H9C x 4 |
| ETH chip1 | Marvell 88F6282 |
| ETH chip2 | Marvell 88E1310-NN82 |
| ETH chip3 | Marvell 88E1310-NN82 |
| Ethernet Port Count |
1-1GbE-WAN 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
Ethernet OUI: 64:00:F1 | |
| Stock bootloader | U-Boot 1.1.4 |
| Stock FW OS | Linux 2.6.35.14 |
| Expansion IF types | USB 2.0, SDHC |
| USB ports | 1 |
| SD/MMC Slots | 1 |
| USB Hub Compatible | Untested |
| PoE | 802.3af, standard |
| Power | 5 VDC, 3 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 4-pin header, JP1, 3.3V TTL, (115200 8N1) |
| JTAG Port | yes, 12-pin header, unpopulated, J4 |
|
Flags: | |
|
Additional chips | |
| Other | |
|
Default IP address: acquired via DHCP | |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
| End of Life date | 2016 |
| (Est.) release date | July 2011 |
| (Est.) initial retail price (in USD): | $250 |
| UPC |
882658429781 (UPC DB, On eBay) |
| ASIN |
B005EPQDK2 |
| Country of manuf | China |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Cisco devices with specifications, see Cisco.
Overview
- CPU: Marvell 88F6282 @1.6 GHz (ARMADA 300)
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 18.06.0
Current supported version: 24.10.4
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 18.06.0
Current supported version: 24.10.4
WLAN Comment: No WLAN
Recovery Comment:
serial + kwboot
Recovery Comment:
serial + kwboot
Please insert instructions here