Cisco Valet M10 v2

multiple revisions of this device, use caution
bgn (N300)
	Wireless-N Broadband Router
Support	Support page
Wikipedia	Cisco Systems
InfoDepot Wiki	Cisco Valet M10 v2.0
WikiDevi.wi-cat.ru	Cisco Valet M10 v2
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Was Supported
Tomato any flavor	Supported
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Cisco M10 v2
FCC ID	Q87-M10V2, Q87-E1000V2
IC ID	3839A-M10V2
Board ID	3763-11200502R
Type	wireless router
Series	Valet
CPU1	Broadcom BCM5357B0
CPU1 Type	MIPS 74K
CPU1 Speed	300 MHz
Flash1 Chip	Macronix MX25L3206E
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Serial)
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	Winbond W9425G6JH-5
ETH chip1	Broadcom BCM5357B0
Switch	Broadcom BCM5357B0
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
	802dot11 OUI: none specified;
Stock bootloader	CFE
Expansion IF types	none specified
Power	12 VDC, 0.5 A
Connector type	barrel
Serial Port (UART)	yes
JTAG Port	yes
Other
Manuf/OEM/ODM	CyberTAN
3rd Party Firmware Support	FreshTomato • (List \| DLs); , OpenWrt (Was);
Retail
Availability	End of Life
FCC approval date	18 May 2010
ASIN	B003B4AVRE , ; multiple uses
Physical
Dimensions	7.95" x 6.30" x 1.34"
Radio 1
Chip1	Broadcom BCM5357B0
Wireless interface OUI	none specified
Antenna Connector Type	Internal
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Linksys E1000 v2.0	Q87-E1000V2; Q87-M10V2
Linksys E1000 v2.0	Q87-E1000V2; Q87-M10V2

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Cisco device with specifications, see Cisco.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"3763-11200502R" is silkscreened on the board in the FCC photos. The hardware appears to be the same as the Linksys E1000 v2.0.

Links of Interest

Cisco valet routers on Wikipedia
Adding Linksys E-series Support On the Tomato Forum

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing OpenWrt

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details.

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 14.07
Current supported version: 22.03.7
Image too big: 18.06.0
Unsupported Functions:
WiFi 2.4GHz

Please insert instructions here

Flashing Tomato

NOTES: To flash from stock firmware, follow the link HERE. After flashing and doing a 30/30/30, you will then be able to flash a more current build of FreshTomato

Please insert instructions here