Cisco WAP131
From TechInfoDepot
Jump to navigationJump to search
abgn (AN600) | |
---|---|
Wireless-N Dual Radio Access Point with PoE | |
Wikipedia | Cisco Systems |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Status Unknown |
Tomato any flavor | Status Unknown |
Platform | |
Brand • Model • Rev | Cisco WAP131 |
FCC ID | PD5-WAP131 |
IC ID | 5604A-WAP121 |
Type | access point |
CPU1 ![]() | Broadcom Model? |
Flash1 Chip | Micron MT29F1G08ABAEA |
Flash1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Chip | Samsung Model? |
ETH chip1 | Broadcom Model? |
ETH chip2 | Broadcom Model? |
Ethernet Port Count | 1-LAN |
802dot11 OUI: none specified | |
Expansion IF types | none specified |
PoE | 802.3af, standard |
Power | 12 VDC, 1.5 A |
Connector type | barrel |
Serial Port (UART) | probably |
JTAG Port | probably |
| |
| |
Other | |
Default IP address: 192.168.1.245 | |
Manuf/OEM/ODM | Delta Networks |
Retail | |
FCC approval date | 04 July 2014 |
Country of manuf | China |
Radio 1 | |
Chip1 | Broadcom Model? |
Wireless interface OUI | none specified |
Antenna Connector Type | U.FL |
MIMO status | 2x2:2 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 300 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
Radio 2 | |
Chip1 | Broadcom Model? |
Wireless interface OUI | none specified |
Antenna Connector Type | U.FL |
MIMO status | 2x2:2 |
Wireless Standard | IEEE 802.11a/n |
802.11n | up to 300 Mbps |
802.11a | up to 54 Mbps |
WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Cisco devices with specifications, see Cisco.
Overview
"2976468401" is silkscreened on the board in the FCC photos.
- The RAM chip used seems to be a 128 MiB K4x1G164QF series chip, the SoC used looks to be BCM4749
Default settings are per the FCC manual.