Compex WPJ342
From TechInfoDepot
Jump to navigationJump to search
| an (AN300) | |
|---|---|
| 5GHz 2×2 Wireless Embedded Board with MiniPCI-e Slot | |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Compex WPJ342LV |
| FCC ID | TK4WPJ342 |
| Type | wireless embedded board |
| CPU1 | Atheros AR9342 |
| CPU1 Type | MIPS 74Kc |
| CPU1 Speed | 560 MHz |
| Flash1 Chip | Macronix MX25L6405D |
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Winbond W9751G6KB-25 |
| ETH chip1 | Atheros AR9342 |
| ETH chip2 | Atheros AR8236 |
| Ethernet Port Count | 2-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Stock FW OS | Linux CompexWRT |
| Expansion IF types | Mini PCIe |
| Mini PCIe slots | 1 |
| PoE | 802.3af, standard |
| Power | 12-24 VDC, ? A |
| Connector type | barrel |
| Serial Port (UART) | yes, 4-pin header |
| JTAG Port | yes, 14-pin header |
|
| |
|
| |
| Other | |
|
| |
| Manuf/OEM/ODM | Compex |
| 3rd Party Firmware Support |
OpenWrt (Was) |
| Retail | |
| Availability | End of Life |
| FCC approval date | 01 September 2014 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | Atheros AR9342 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Compex devices with specifications, see Compex.
Overview
Per Compex's datasheet...
- "C-432JPW 7A03" is silkscreened on the board shown
- It seems to be indicated that there are (or will be) two item codes for the device..
- one for a low voltage (12-24V PoE) and one for a high voltage model (36-48V PoE)
- DC jack input is noted as 12-24V for both boards
- CompexWRT is noted as the stock OS - it seems to be derived from OpenWrt
- OpenWrt is (or will be, if not now) supported on these boards
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
OpenWrt Target: ar71xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 19.07.10
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 19.07.10
Please insert instructions here
See also
- Compex MML342 - PPage
- Compex MMJ342 - PPage
- Compex MMJ342 Plus - PPage
- Compex WPJ344 - TK4WPJ344 (08/22/2014) PPage
- Compex WPJ531 - TK4WPJ531 (07/24/2015) PPage
Categories:
- Compex
- Embedded system/wireless embedded board
- Embedded System Atheros
- Embedded System AR9342
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System AR8236
- Manuf Compex
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation