Cudy Gigabit VPN Router (R700)
From TechInfoDepot
Jump to navigationJump to search
| Gigabit Multi-WAN VPN Router | |
|
| |
| Homepage | Product page |
|---|---|
| WikiDevi.wi-cat.ru | Cudy Gigabit VPN Router (R700) |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Cudy R700 US v1.0 |
| Model Part Number | R700 |
| Board ID | 300400002 |
| Type | VPN Router, router |
| CPU1 | MediaTek MT7621DAT |
| CPU1 Type | MIPS 1004Kc |
| CPU1 Speed | 880 MHz ( 2 cores ) 16-bit |
| Flash1 Chip | XMC XM25QH128CHIQ |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | MediaTek MT7621DAT |
| ETH chip1 | MediaTek MT7621DAT |
| Switch | MediaTek MT7621DAT |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Stock bootloader | U-Boot 1.1.3 |
| Stock FW OS | Linux 4.4.140 LEDE OpenWrt 17.01.5 1.15.3 |
| Expansion IF types | none specified |
| Power | 12 VDC, 1 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) | yes, 4-pin header, unpopulated, 3.3V TTL, (115200 8N1) |
| JTAG Port | no |
|
Flags: | |
|
| |
| Other | |
|
Default IP address: 192.168.10.1 | |
| Manuf/OEM/ODM | Cudy |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| (Est.) release date | September 2022 |
| EAN |
6971690792985 (UPC DB, On eBay) |
| Newegg | 9SIACKEKB35267 |
| ASIN |
B0BFVQK2ZD |
| Country of manuf | China |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Cudy devices with specifications, see Cudy.
Overview
- Powerful VPN Router, Support PPTP Server & Client,
- L2TP Server & Client, OpenVPN Server & Client,
- WireGuard Server or Client, IPsec Site to Site VPN,
- support Zerotier Master & Slave.
- Load Balancing Router, Internet Access Control
Hardware specification
- CPU: MediaTek MT7621DAT @880MHz
- SoC: Dual-core MIPS 1004Kc
- Flash: 16MB (NOR) XMC flash
- Memory: 128MB (int. DDR3) SDRAM
- Network: 5x GbE (WAN/LAN) ports
- 1x Gigabit WAN Port
- 3x Gigabit WAN/LAN Ports
- 1x Gigabit LAN Port
- Power Source: 12V/1A via barrel
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: snapshot
WLAN Comment: No WLAN
Please insert instructions here