Cudy LT400E v1
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| 4G LTE Wi-Fi Router | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Cudy LT400E v1 |
| FCC ID | none specified |
| Type | LTE router, wireless router |
| CPU1 | MediaTek MT7628AN |
| CPU1 Type | MIPS 24KEc |
| CPU1 Speed | 580 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (NOR) |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2) |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | MediaTek MT7628AN |
| Switch | MediaTek MT7628AN |
| Ethernet Port Count |
1-100MbE-WAN 3-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | Nano SIM Slot |
| SIM Card slot | 1 |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 3.3, 115200 / 8N1 |
| JTAG Port | no |
|
Flags: | |
|
| |
|
| |
| Radio 1 | |
| Chip1 | MediaTek MT7628AN |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Cudy devices with specifications, see Cudy.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
The Cudy LT400E v1 is an indoor cellular wireless router. It is based on the MT7628AN SoC, which provides the 2.4 GHz radio and 4x 10/100 Mbps Ethernet ports, and integrates a Quectel EC200A 4G/LTE Cat 4 modem, capable of achieving rates up to 150/50 Mbps downlink/uplink.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: ramips
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: snapshot
OpenWrt Subtarget: mt76x8
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: snapshot
Unsupported Functions:
Cellular RSSI LEDs
LAN Hardware: MediaTek MT7628AN
LAN Comment: Quectel EC200 4G/LTE modem
WLAN Hardware: MediaTek MT7628AN
WLAN Comment: 2:2
Install Comment:
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image
Cellular RSSI LEDs
LAN Hardware: MediaTek MT7628AN
LAN Comment: Quectel EC200 4G/LTE modem
WLAN Hardware: MediaTek MT7628AN
WLAN Comment: 2:2
Install Comment:
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image
Please insert instructions here